Skip to product information
1 of 3

Skytech

Skytech Electronic Fan Speed Control, Multi-Speed Fireplace Blower Control with Timer | FK-ESC

Skytech Electronic Fan Speed Control, Multi-Speed Fireplace Blower Control with Timer | FK-ESC

Regular price $150.00
Regular price $180.00 Sale price $150.00
Sale Sold out
Shipping calculated at checkout.
Skytech Electronic Fan Speed Control, Multi-Speed Fireplace Blower Control with Timer | FK-ESC
View full details

The Skytech FK-ESC is an electronic fan speed control that runs an existing fireplace blower off the main flame. It turns the fan on 7 minutes after the main burner lights and off 12 minutes after it goes out, with four speeds to choose from. It is made to retrofit the fan or blower on a hearth product with a millivolt or electronic IPI valve system.

Follows the flameOn at 7 min, off at 12 min
4 speedsHi, Medium Hi, Medium Lo, Lo
200 watt capacityUniversal fan rating
120VACThrough the factory junction box

Details

ModelFK-ESC
TypeElectronic fan speed control with timed start and stop
TimingFan on 7 minutes after the main flame lights, off 12 minutes after it goes out
SpeedsHi, Medium Hi, Medium Lo, Lo and OFF; remembers the last setting; TEST button runs the fan on Hi
Fan capacity200 watts
Valve systemsMillivolt or electronic IPI (senses 50mV DC to 9VDC); not for 24VAC gas valve systems
Power120VAC through an approved factory installed junction box
In the boxFK-ESC control, ACF10 10 inch cord with ground wire and receptacle, jumper wire for IPI valves, jumper wire for power strips, connector hardware
WarrantyTwo years from purchase or installation, original owner
BrandSkytech
Match the wiring diagrams exactly.Skytech notes the FK-ESC is polarity sensitive, so the sense wires have to land where the diagrams show, and the green ground wire must be connected before you finish. Disconnect power before you start, and remember it will not run with a 24VAC gas valve system.

Questions people ask us

Will it work with my fireplace?

The FK-ESC reads the signal from a millivolt or electronic IPI valve and will not operate with a 24VAC gas valve system. The instructions include extra steps for SIT valves and Dexen IPI valves. Send us the fireplace model and we will check.

Can I use it with the fan I already have?

Yes, that is what it is built for. Your existing fan plugs into the included ACF10 cord, and the FK-ESC plugs into the original fan outlet. Skytech rates it for a 200 watt universal fan capacity.

How do I change the fan speed?

Press the FAN SPEED button and the LEDs show which of the four speeds is set. The control remembers your last setting, and holding TEST runs the fan on Hi so you can check the wiring.

Is there a kit that includes a blower?

Yes. The FK-165-ESC pairs this control with the low profile F-165-1 blower, and the FK-180-ESC pairs it with the dual fan F-180-1 blower.

Goes with this

Manuals and warranty

Skytech manuals and warranty

Warranty terms come from Skytech and depend on the product. Read the manual and the warranty for your model before you order.

Our warranty library· FK-ESC instructions (PDF)
Not sure this is the right fan control? Send us your fireplace model and the valve it uses, and we will check the control before you order. No obligation either way.
Ask us before you order