Skip to product information
1 of 3

Skytech

Skytech On/Off Fireplace Remote Control, Plug-In Receiver System | SKY1420-A

Skytech On/Off Fireplace Remote Control, Plug-In Receiver System | SKY1420-A

Regular price $231.00
Regular price $277.20 Sale price $231.00
Sale Sold out
Shipping calculated at checkout.
Skytech On/Off Fireplace Remote Control, Plug-In Receiver System | SKY1420-A
View full details

The Skytech 1420-A is an on/off fireplace remote with a battery operated transmitter and a receiver that plugs into a standard 110 to 120VAC outlet. The receiver's dry contact relay switches a millivolt gas valve, or an electronic spark ignition system through a 24VAC transformer. A slide switch on the receiver lets you run the fireplace by hand.

On/OffTwo button transmitter
Plug-in receiver110 to 120VAC outlet
20 to 25 ftOperating range
ON / REMOTE / OFFManual switch on the receiver

Details

ModelSKY1420-A
TypeOn/off RF remote system
TransmitterON and OFF buttons, LED signal light, one 12V A23 battery (included)
ReceiverPlugs into a 110 to 120VAC outlet; dry contact relay; ON / REMOTE / OFF slide switch; LEARN button
Works withMillivolt gas valves; electronic spark ignition through a 24VAC transformer
Range20 to 25 feet
Security codes65,536
Extra transmittersReceiver can learn up to two additional Skytech transmitters
In the boxTransmitter, receiver, batteries, hardware bag, wall clip, instructions
BrandSkytech
Keep the receiver out of high heat.Skytech says to keep the receiver away from temperatures above 130 degrees F, and heat damage is not covered by the warranty. Connector ends must not touch each other or bare metal, since that can turn the fireplace on.

Questions people ask us

Will it work with my fireplace?

The 1420-A switches millivolt gas valves, and Skytech shows a hookup for electronic spark ignition through a 24VAC transformer. The receiver needs a standard outlet nearby. Send us the fireplace model and we will check.

What battery does the transmitter use?

One 12V A23 battery, included. Skytech recommends alkaline and expects at least 12 months of use. Replace it when the range drops or it reads below 9.0 volts.

Do I need to pair it?

Yes, on first use, after a battery change, or with a replacement transmitter. Set the receiver switch to REMOTE, press LEARN, wait for the beep, then press a transmitter button.

Not sure the 1420-A suits your fireplace?

Send us the fireplace or valve model and we will confirm it before you order. Ask us here.

Goes with this

Manuals and warranty

Skytech manuals and warranty

Warranty terms come from Skytech and depend on the product. Read the manual and the warranty for your model before you order.

Our warranty library· 1420-A instructions (PDF)
Not sure this is the right remote? Send us your fireplace or valve model and we will check the remote before you order. No obligation either way.
Ask us before you order