Skip to product information
1 of 3

Skytech

Skytech Thermostat Fireplace Remote Control, Battery Operated LCD Remote | SKY1001TH-A

Skytech Thermostat Fireplace Remote Control, Battery Operated LCD Remote | SKY1001TH-A

Regular price $292.00
Regular price $350.40 Sale price $292.00
Sale Sold out
Shipping calculated at checkout.
Skytech Thermostat Fireplace Remote Control, Battery Operated LCD Remote | SKY1001TH-A
View full details

The Skytech 1001TH-A is a battery operated thermostat fireplace remote with a 4 button transmitter and an LCD that shows room and set temperature. The transmitter and receiver both run on batteries, so no outlet is needed at the fireplace. It works with millivolt gas valves, and with electronic spark ignition through a 24VAC transformer.

4 buttonsON, OFF, MODE, SET
LCD displayRoom and set temperature
ThermostatSet from 45 to 99 degrees F
Battery operatedTransmitter and receiver

Details

ModelSKY1001TH-A
TypeThermostat RF remote system
Transmitter4 buttons, LCD with flame and low battery indicators, 2 x AAA batteries
Receiver4 x AA batteries; ON / REMOTE / OFF slide switch
ThermostatSet from 45 to 99 degrees F; cycles about 2 degrees F around the set point; reads in F or C
Works withMillivolt gas valves; electronic spark ignition through a 24VAC transformer
Range20 to 25 feet
Security codes65,536
Extra transmittersReceiver can learn up to two additional Skytech transmitters
Valve wiringAt least 18 gauge, no longer than 20 feet, no splices (wall mounted receiver)
In the boxTransmitter, receiver, wall plate, batteries, hardware bag, wall clip, instructions
BrandSkytech
Keep connector ends apart.Skytech's instructions warn that connectors touching each other or bare metal can turn the fireplace on. A qualified electrician should install the system, and the receiver should stay below 130 degrees F.

Questions people ask us

Will it work with my fireplace?

The 1001TH-A is made for millivolt gas valves, and Skytech also shows a hookup for electronic spark ignition through a 24VAC transformer. Send us the fireplace model and we will check.

What batteries does it use?

The transmitter takes two AAA batteries and the receiver takes four AA batteries. Skytech recommends alkaline.

Can it show Celsius?

Yes. It ships in Fahrenheit. Press ON and OFF together to switch to Celsius, and repeat to go back.

How does thermostat mode work?

Press MODE to switch between manual and thermostat, then use SET to pick a temperature. The transmitter checks the room every 2 minutes and cycles the fire about 2 degrees F above or below your setting.

Not sure the 1001TH-A suits your fireplace?

Send us the fireplace or valve model and we will confirm it before you order. Ask us here.

Goes with this

Manuals and warranty

Skytech manuals and warranty

Warranty terms come from Skytech and depend on the product. Read the manual and the warranty for your model before you order.

Our warranty library
Not sure this is the right remote? Send us your fireplace or valve model and we will check the remote before you order. No obligation either way.
Ask us before you order