• Skytech On/Off/Hi/Low Remote System, 6V Flame Adjustment Control, model MRCK
1 1

Skytech

Skytech On/Off/Hi/Low Remote System, 6V Flame Adjustment Control | MRCK

Skytech On/Off/Hi/Low Remote System, 6V Flame Adjustment Control | MRCK

$232.00
$278.40 $232.00
Sale Sold out
Shipping calculated at checkout.
Skytech On/Off/Hi/Low Remote System, 6V Flame Adjustment Control | MRCK
View full details

The Skytech MRCK is a 6-volt On/Off/Hi/Low remote system for gas appliances that use a HI/LO servo motor valve. The battery receiver drives the servo motor forward or back, giving you flame adjustment from the remote. It suits decorative gas logs, gas fireplaces and other gas heating appliances fitted with that style of valve.

Flame adjustmentHi and Low from the remote
6-volt outputTo the servo motor
Battery operatedTransmitter and receiver
About 20 ftOperating range per Skytech

Details

ModelMRCK
TypeSingle function remote for a HI/LO servo motor valve
Works withHI/LO servo motor gas valves on gas logs, fireplaces and other gas heating appliances
Output4.5 to 6.0 VDC to the servo motor, polarity reverses for HI and LO
Transmitter12V A23 battery
Receiver4 x AA batteries
RangeAbout 20 feet
Security codes65,536
Valve wiring18 gauge stranded, up to 20 feet, with 1/4" and 3/16" female terminals
In the boxTransmitter, receiver, receiver shield, batteries, hardware bag, wall clip, instructions
BrandSkytech
Mount the receiver beside the valve, away from the fire.Skytech's manual says to keep the receiver below 120°F, set the shield over it after wiring, and never connect it directly to 110 to 120VAC, which will burn out the receiver.

Questions people ask us

Will it work with my valve?

The MRCK runs a HI/LO style servo motor gas valve. It is not meant for valves without that motor. Send us the valve model and we will check.

How is the flame adjusted?

ON/HI drives the servo toward full flame and LO/OFF drives it back down. Skytech lists infinite flame adjustment from the remote.

The flame goes the wrong way. What now?

Skytech's fix is to reverse the two wires, either at the receiver or at the valve.

What batteries does it use?

The transmitter takes a 12V A23 battery and the receiver takes four AA alkaline batteries.

Not sure the MRCK suits your valve?

Send us a photo of the valve label or the appliance model and we will confirm it before you order. Ask us here.

Goes with this

MRCK-TH Thermostat RemoteAdds thermostat and LCD CON On/Off RemoteFor latching solenoid valves SkytechRemotes, valves and fans

Manuals and warranty

Skytech manuals and warranty

Warranty terms come from Skytech and depend on the product. Read the manual and the warranty for your model before you order.

Our warranty library· MRCK instructions (PDF)
Not sure this is the right remote? Send us your appliance model or a photo of the valve label and we will check the remote before you order. No obligation either way.
Ask us before you order