Skip to product information
1 of 3

Skytech

Skytech Natural Gas to Propane Conversion Kit, for AF-LMF 18" Models | LPK-18

Skytech Natural Gas to Propane Conversion Kit, for AF-LMF 18" Models | LPK-18

Regular price $68.00
Regular price $81.60 Sale price $68.00
Sale Sold out
Shipping calculated at checkout.
Skytech Natural Gas to Propane Conversion Kit, for AF-LMF 18" Models | LPK-18
View full details

The Skytech LPK-18 converts a Skytech valve kit with an 18 inch burner from natural gas to liquid propane. Skytech sells it for AF-LMF series valve kits, and its instructions also list the AFVK-SP and AFVK series. The kit supplies the main orifice and air shutter, fittings, two propane pilot orifices and vermiculite.

NG to propaneConversion kit
18 inch burnerLPK-24 for 24 inch
#50 orificeWith air shutter
VermiculiteReplaces the sand

Details

ModelLPK-18
ConvertsNatural gas (NG) to liquid propane (LP)
Burner size18 inch
Valve kitsAF-LMF series; Skytech's instructions also list AFVK-SP and AFVK series
Main orifice#50 orifice and air shutter (6857-14)
Fittings90 degree flare connector elbow (6857-12); 1/2" x 3/8" cast iron reducer (6857-13) for 1/2" NPT male burner pan connections
Pilot orificesTwo propane pilot orifices, PSE707 and 238577-22(P), marked #13 and #.012LP
MediaVermiculite (6857-16)
Not includedInlet pressure regulator, which Skytech recommends on propane installations
BrandSkytech
Have a qualified installer or your gas supplier do the conversion.Skytech's instructions call for turning off the gas, replacing the sand in the burner pan with vermiculite, converting the gas valve as the valve kit instructions describe and checking every connection with a soapy water solution. Run the logs with any glass doors fully open and the damper open.

Questions people ask us

LPK-18 or LPK-24?

Match the kit to the burner. The LPK-18 is for an 18 inch burner, and the LPK-24 is for a 24 inch burner.

Which pilot orifice do I use?

The kit has two. Skytech says to replace a natural gas orifice stamped #20 on top with the #13, and one stamped #.018N on the side with the #.012LP.

Do I need anything else?

Skytech recommends an inlet pressure regulator on all propane installations, and it is not included. The reducer is only needed if your burner pan has a 1/2" NPT male connection.

Can I do the conversion myself?

Skytech points you to a qualified installer, service agency or the gas supplier. The work involves the burner orifice, the pilot orifice and the gas valve, followed by a full leak check.

Not sure this kit fits your valve?

Send us the valve kit model and burner size, and we will confirm before you order. Ask us here.

Goes with this

Manuals and warranty

Skytech manuals and warranty

Warranty terms come from Skytech and depend on the product. Read the manual and the warranty for your model before you order.

Our warranty library· LPK-18 instructions (PDF)
Not sure this is the right conversion kit? Send us your valve kit model and burner size, and we will check the kit before you order. No obligation either way.
Ask us before you order