AutoPilot
CPB0006A - AutoPilot Pool Pilot Evolve w/ PPM1 Manifold
CPB0006A - AutoPilot Pool Pilot Evolve w/ PPM1 Manifold
CPB0006A AutoPilot Pool Pilot Evolve Salt System with PPM1 Manifold
Smart Salt Chlorination for Residential Pools
The CPB0006A AutoPilot Pool Pilot Evolve with PPM1 Manifold is a smart salt chlorine generator system designed for residential pools up to 30,000 gallons. Built for clean, clear, comfortable pool water, this system pairs AutoPilot’s advanced Evolve power center with the PPM1 manifold and PPC1 salt cell.
The Pool Pilot Evolve is designed for pool owners who want a modern salt system with advanced monitoring, easy controls, temperature compensation, boost mode, and optional PoolSync Wi-Fi control. It helps reduce manual chlorine handling while giving you better visibility into salt level, flow, and water temperature.
ATB Sizing Note
The CPB0006A is rated for pools up to 30,000 gallons, but real-world chlorine demand depends on more than gallon size. Sun exposure, bather load, water temperature, stabilizer level, phosphates, pump run time, and pool condition all matter. If your pool is close to 30,000 gallons, gets full sun, or has heavy swimmer load, compare the next size up before ordering.
Why Choose the AutoPilot CPB0006A Pool Pilot Evolve?
- Complete Pool Pilot Evolve salt system for pools up to 30,000 gallons
- Includes PPM1 manifold and PPC1 salt cell for residential chlorine production
- Produces up to 1.0 lb of chlorine per day under proper operating conditions
- Advanced tri-sensor monitoring measures water flow, salt level, and temperature
- Patented temperature compensation helps manage chlorine output as water temperature changes
- 24-hour boost cycle for increased chlorine demand after storms, parties, or heavy pool use
- PoolSync compatible for app-based monitoring and control with optional PoolSync Wi-Fi module
- Simple installation and service design with AutoPilot’s proven manifold and cell architecture
Product Details
| Brand | AutoPilot |
| Manufacturer Part Number | CPB0006A |
| System | Pool Pilot Evolve Salt Chlorine Generator |
| Manifold | PPM1 Manifold |
| Cell Family | PPC1 Salt Cell |
| Pool Capacity | Up to 30,000 gallons |
| Chlorine Output | Up to 1.0 lb per day |
| Power Center | Pool Pilot Evolve Controller |
| Voltage | 110/220V |
| Frequency | 50Hz/60Hz |
| Operating Flow Range | As low as 15 GPM, system dependent |
| Maximum Water Temperature | Up to 104°F / 40°C |
| Smart Features | Advanced diagnostics, temperature compensation, boost mode, optional PoolSync Wi-Fi |
What Comes With the CPB0006A?
The CPB0006A is a complete Pool Pilot Evolve salt system package with the PPM1 manifold setup. It is built for pool owners who want a dependable residential salt chlorination system with AutoPilot’s advanced controls and diagnostics.
How the Pool Pilot Evolve Works
The AutoPilot Pool Pilot Evolve converts dissolved salt in the pool water into chlorine. The system continuously sanitizes the pool while reducing the need to manually add chlorine tablets or liquid chlorine. When installed with the PPM1 manifold, the Evolve system monitors key operating conditions and helps maintain consistent chlorine production.
The integrated sensor setup monitors flow, salt level, and water temperature. This allows the power center to make smarter chlorine production decisions and helps the owner or service professional troubleshoot issues faster.
ATB Real-World Chlorine Demand Checklist
Even a properly sized salt system needs balanced water and enough pump run time. For best performance, check:
- Salt level confirmed with a reliable test meter
- Stabilizer/CYA in the proper range for salt pools
- Phosphate level under control
- Proper pump run schedule for the pool size
- Clean filter and proper water flow through the manifold
- Correct output percentage for the season and pool demand
PoolSync Wi-Fi Compatibility
The Pool Pilot Evolve platform is compatible with AutoPilot PoolSync when paired with the optional PoolSync Wi-Fi controller, sold separately. PoolSync allows app-based access for monitoring, alerts, and system adjustments from a compatible mobile device.
With PoolSync, pool owners can get better visibility into system operation, receive alerts when attention is needed, and make chlorine output adjustments without standing at the equipment pad.
When Should You Choose the CPB0006A?
- You have a residential pool up to 30,000 gallons
- You want a modern AutoPilot Pool Pilot Evolve salt system
- Your pool has normal residential chlorine demand
- You prefer a salt system with advanced diagnostics and sensor monitoring
- You want a system that can be paired with PoolSync Wi-Fi control
- You are replacing or upgrading an older AutoPilot salt chlorine generator system
CPB0006A vs Other Evolve Models
The CPB0006A is the PPM1 model in the Pool Pilot Evolve lineup. It is the smallest Evolve package, making it a strong fit for smaller to mid-size residential pools where the PPM3, PPM4, or PPM5 systems would be more than the pool needs.
| Model | Manifold | Best For |
| CPB0006A | PPM1 | Smaller to mid-size residential pools |
| CPB0007A | PPM3 | Mid-size residential pools |
| CPB0008A | PPM4 | Larger residential pools and higher chlorine demand |
| CPB0009A | PPM5 | Largest pools and maximum chlorine demand |
ATB Expert Tip
The CPB0006A is a great fit for pools comfortably under 30,000 gallons with normal chlorine demand. If your pool is near 30,000 gallons, gets full sun, runs warm, or sees heavy swimmer use, moving up to the CPB0007A can give you more production headroom and less strain on the cell.
Installation Notes
The AutoPilot CPB0006A should be installed by a qualified pool professional or electrician familiar with salt chlorine generator systems. The power center must be wired correctly, the manifold must be installed in the proper plumbing orientation, and water flow must be verified before operation.
Before installation, confirm that the pool water is balanced, salt has been added to the correct range, and the pump/filter system is operating properly. A salt chlorine generator cannot overcome poor water balance, heavy algae, high phosphates, or inadequate circulation.
Frequently Asked Questions
What is the AutoPilot CPB0006A?
The CPB0006A is the AutoPilot Pool Pilot Evolve salt chlorine generator system with the PPM1 manifold and PPC1 cell. It is designed for residential pools up to 30,000 gallons.
What size pool does the CPB0006A support?
The CPB0006A is rated for pools up to 30,000 gallons under proper operating conditions. Actual performance depends on water chemistry, sun exposure, bather load, pump run time, and overall chlorine demand.
Does the CPB0006A include the manifold and cell?
Yes. The CPB0006A package includes the Pool Pilot Evolve power center and the PPM1 manifold with the matching PPC1 cell configuration.
Does this system work with PoolSync?
Yes. The Pool Pilot Evolve is PoolSync compatible when paired with the optional PoolSync Wi-Fi controller, sold separately.
What makes the PPM1 model different?
The PPM1 version is the 30,000 gallon Evolve configuration. It is paired with the PPC1 cell and is designed for smaller to mid-size residential pools.
Can this replace an older AutoPilot salt system?
In many cases, the Pool Pilot Evolve can be used as an upgrade path from older AutoPilot systems. Existing plumbing, cell type, manifold layout, wiring, and equipment condition should be reviewed before ordering.
Do I still need to test my pool water with a salt system?
Yes. Salt systems make chlorine, but they do not replace regular water testing. Salt, pH, alkalinity, stabilizer, phosphates, calcium hardness, and chlorine should still be checked routinely.
Order CPB0006A from Aqua Terra Backyard
At Aqua Terra Backyard, we help pool owners and service professionals choose the right salt system before the order ships. The AutoPilot CPB0006A Pool Pilot Evolve with PPM1 Manifold is a smart entry point into the Evolve lineup, built for residential pools up to 30,000 gallons and customers who want advanced diagnostics with reliable salt chlorine production.
Need help confirming the right size? Send us your pool gallon size, current equipment setup, pump run schedule, and whether you are replacing an existing salt system. We can help confirm whether the CPB0006A is the right AutoPilot Evolve model for your pool.
