• Majestic WarmMajic II wood-burning fireplace in a living room
  • Majestic WarmMajic II wood-burning fireplace, product only
1 2

Majestic

Majestic WarmMajic II EPA Wood Burning Fireplace

Majestic WarmMajic II EPA Wood Burning Fireplace

$6,649.00
$6,649.00
Sale Sold out
Shipping calculated at checkout.
Freight Shipping Notice This item may require freight delivery due to its size or weight. Please complete your order normally. Qualifying freight ships free to 44 states plus Washington, DC. Alaska, Hawaii, Idaho, Montana, North Dakota, and South Dakota require a freight quote, and oversized pallets may require a quote to any destination. If a quote is needed, we will contact you after your order is placed. Freight charges are not included unless specifically shown at checkout, and any additional freight charge must be quoted, approved and paid before the order ships.
Majestic WarmMajic II EPA Wood Burning Fireplace
View full details

The Majestic WarmMajic II (WARMMAJIC-D) is an EPA 2020 certified wood-burning fireplace rated 1.7 g/hr and 73% LHV efficient. It holds 22 inch logs in a 2.7 cubic foot firebox for overnight heating and ships with its door, firebrick and fans. Optional Heat-Zone ducting can carry heat to other rooms.

EPA 20201.7 g/hr certified emissions
20,900 BTUEPA output; 81,000 peak
22 in. logs2.7 cu ft firebox
Fans included110-120 VAC

Specifications

ModelWARMMAJIC-D
EPA certified emissions1.7 g/hr (2020 standard)
Efficiency73% LHV, 69% HHV (tested)
Heat outputEPA 20,900 BTU/h; peak 81,000 BTU/h
Log length22 in. recommended
WeightAbout 605 lb
Chimney8 in.: SL300 series (with CAK4A chimney air kit) or DuraPlus; 13 ft minimum straight, 90 ft maximum
Outside airRequired; kit included, 6 in. duct run of 36 in. to 40 ft
Ships withDoor, firebrick, non-combustible facing, fans, outside air hood and collars, hearth strips, attic insulation shield, CAK4A
FrontA front is required to complete the installation
ListingUL 127, CAN/ULC-S610, (UM) 84-HUD
BrandMajestic (Hearth & Home Technologies)
Burn seasoned wood only.Majestic specifies seasoned cord wood under 20% moisture. A hearth extension is required, and the front completes the install. Majestic wood-burning fireplaces should be installed by a qualified, certified installer to the instructions and local codes.

Questions people ask us

How much heat does it make?

The manual lists 20,900 BTU/h EPA output and 81,000 BTU/h peak, at 73% LHV efficiency.

What comes with it?

The door, firebrick, fans, facing material, outside air kit and the CAK4A chimney air kit for SL300. The chimney and hearth extension are separate. See chimney and venting.

Can it heat more than one room?

Yes, with the optional Heat-Zone ducting kit, which a qualified service technician must install.

Want help planning it?

Send us the room and chimney route and we will go through it with you. Ask us here.

Goes with this

Pioneer IIAnother EPA wood fireplace Chimney and ventingSL300 and DuraPlus parts Majestic wood fireplacesThe full wood range Talk to usHeating and chimney questions

Manuals and warranty

Majestic manuals and warranty

Warranty terms come from Majestic and depend on the product. Read the manual and the warranty for your model before you order.

Our warranty libraryยท Installation manual (PDF)ยท Owner's manual (PDF)
Not sure this is the right wood fireplace? Tell us how you want to heat the house and we will help you decide. No obligation either way.
Ask us before you order