Skip to product information
1 of 1

IHP

IHP Snap-Pak 7" Round Cap with Spark Arrester | 7SPC

IHP Snap-Pak 7" Round Cap with Spark Arrester | 7SPC

Regular price $180.00
Regular price Sale price $180.00
Sale Sold out
Shipping calculated at checkout.
IHP Snap-Pak 7" Round Cap with Spark Arrester | 7SPC
View full details

The IHP 7SPC is the round cap with spark arrester that tops a 7 inch Snap-Pak chimney. It is the termination for the system, keeping rain out and holding back sparks. Catalog number F4010.

7" Snap-Pak7" inner / 10" outer
Spark arresterBuilt into the cap
3 ft / 2 ft ruleTermination height
F4010IHP catalog number

Details

Model7SPC (F4010)
DescriptionRound cap with spark arrester
SystemIHP Snap-Pak 7" chimney
Termination heightAt least 3 ft above the roof opening and 2 ft above anything within 10 ft
Carton13.70" x 13.70" x 12.70", 5.00 lbs
BrandIHP (Innovative Hearth Products)
Keep the cap high enough.The Snap-Pak ten foot rule puts the top at least 2 ft above any roof or structure within 10 ft and never less than 3 ft above the highest point where the chimney passes through the roof.

Questions people ask us

How high must the cap be?

At least 3 ft above where the chimney passes through the roof, and 2 ft above anything within 10 ft.

Does it fit the 6" chimney?

No, 7SPC is for the 7" Snap-Pak.

Does it need a storm collar?

The storm collar goes at the roof flashing, not at the cap. For the 7" system order 7SPSC.

Goes with this

Manuals and warranty

IHP manuals and warranty

Warranty terms come from IHP and depend on the product. Read the manual and the warranty for your model before you order.

Our warranty libraryยท Snap-Pak installation and maintenance instructions (PDF)ยท Snap-Pak smart sheet (PDF)
Not sure this is the right cap? Send us your appliance and chimney details and we will confirm the termination before you order. No obligation either way.
Ask us before you order