Skip to product information
1 of 2

IHP

IHP Snap-Pak 7" Stainless Steel Chimney Length

IHP Snap-Pak 7" Stainless Steel Chimney Length

Regular price $449.00
Regular price Sale price $449.00
Sale Sold out
Shipping calculated at checkout.
IHP Snap-Pak 7" Stainless Steel Chimney Length
View full details

IHP Snap-Pak 7" chimney lengths are insulated stainless steel sections for the 7 inch Snap-Pak wood burning chimney system. The inner flue and outer casing are 430 stainless steel with ceramic fiber insulation between them, and each section snaps onto the next. Choose 2-packs of 12" (7SPS12-2) or 18" (7SPS18-2) sections, or single 24", 36" or 48" sections.

7" inner / 10" outerSnap-Pak 7" system
UL103HTAlso ULC-S629
2" clearanceAir space to combustibles
5 lengths12" to 48"

Details

Models7SPS12-2 (F3995), 7SPS18-2 (F3996), 7SPS24 (F3997), 7SPS36 (F3998), 7SPS48 (F3999)
Lengths12" and 18" (2-packs), 24", 36", 48"
Diameter7" inner, 10" outer
Construction430 stainless steel inner flue and outer casing
Insulation1-1/2" ceramic fiber blanket
ListingUL103HT listed / ULC-S629
Temperature rating2100°F intermittent, 1000°F continuous
Clearance to combustibles2" air space
Assembled length1-1/2" less than the listed length, because sections overlap 1-1/2"
Maximum chimney height60 ft, per the installation instructions
BrandIHP (Innovative Hearth Products)
Plan the full chimney run first.Height, elbows, supports, firestops and termination all follow the Snap-Pak instructions and your appliance manual. A qualified installer should design and install the chimney.

Questions people ask us

How much height does each section add?

Sections overlap by 1-1/2", so a 48" section adds about 46-1/2" once joined.

Which fireplaces use Snap-Pak?

IHP specifies Snap-Pak as the US chimney for its EPA wood burning fireplaces. For example, the Astria Bainbridge-B calls for the 6" system and the Superior WCT6940WS for the 7" system. Canadian installations use the other chimneys named in each manual. Your appliance manual decides the diameter.

Why are the 12" and 18" sections sold in pairs?

IHP packs the 12" and 18" lengths as 2-packs. The price on this page is for the pack.

What else does a chimney need?

Plan the support, firestop spacers, flashing, storm collar and cap as well. Ask us and we will put the parts list together with you.

Goes with this

Manuals and warranty

IHP manuals and warranty

Warranty terms come from IHP and depend on the product. Read the manual and the warranty for your model before you order.

Our warranty library· Snap-Pak installation and maintenance instructions (PDF)· Snap-Pak smart sheet (PDF)
Not sure these are the right chimney lengths? Tell us your fireplace model and the height to the roof and we will help you choose the sections. No obligation either way.
Ask us before you order