• Grand Canyon 3 Burner See Through vented gas log burner, sold without logs
1 1

Grand Canyon

Grand Canyon 3 Burner See-Through Gas Log Burner, Burner Only (Logs Not Included)

Grand Canyon 3 Burner See-Through Gas Log Burner, Burner Only (Logs Not Included)

$1,014.00
$1,014.00
Sale Sold out
Shipping calculated at checkout.
Grand Canyon 3 Burner See-Through Gas Log Burner, Burner Only (Logs Not Included)
View full details

The Grand Canyon 3 Burner See Through is a vented gas log burner kit for a see-through wood burning fireplace. It is the burner only: logs are not included. It has an even distribution rear burner, a dual action middle burner and a dedicated ember glow burner on a fully welded stainless steel chassis, in sizes from 18 to 42 inches (3BRN-ST18 to 3BRN-ST42). The standard kits are natural gas burners, and the -SS versions are built in stainless steel for outdoor patio fireplaces.

103,000 to 140,000 BTUNatural gas rating, 18" to 42"
Three burnersRear, middle and ember glow
Vented use onlySolid fuel fireplace with a working flue
ANSI Z21.60 / CSA 2.26Decorative gas appliance standard

Specifications

ModelsStandard: 3BRN-ST18, 3BRN-ST24, 3BRN-ST30, 3BRN-ST36, 3BRN-ST42. Stainless steel: 3BRN-ST18-SS, 3BRN-ST42-SS
What you getBurner kit only. Logs and the valve or ignition kit are sold separately
Kit contentsBurner, lava rock (HP-B-R-10), embers (GLE-6B), vermiculite (VEM-8), Whistle Free flex line (T202-9898-16), flare gas inlet fitting (46-88), damper clamp (00F0545), rating plate and manual
Burner designEven distribution rear burner, dual action middle burner and dedicated ember glow burner; fully welded sandless design, stainless steel chassis
FuelNatural gas burner; Grand Canyon notes it is convertible to propane
Rated input, natural gas18" 103,000; 24" 118,000; 30" 128,000; 36" 135,000; 42" 140,000 BTU
Rated input, propane18" 93,000; 24" 100,000; 30" 115,000; 36" 125,000; 42" 130,000 BTU
Minimum firebox (front width x depth x back width x height, in.)18" 30 x 14 x 30 x 16; 24" 36 x 14 x 36 x 16; 30" 42 x 16 x 42 x 16; 36" 48 x 16 x 48 x 16; 42" 54 x 16 x 54 x 16
Gas connection1/2" piping and 1/2" bar stock; gas inlet left or right
Gas pressureNatural gas: 3.5" w.c. manifold, 4.5" to 7" w.c. supply. Propane: 10" w.c. manifold, 11" to 14" w.c. supply
Compatible controlsSold separately. Grand Canyon's chart lists high capacity safety pilot, high capacity millivolt, modulating millivolt (MMVKR-NG / MMVKR-LP), battery electronic (MVKEIKN / MVKEIKLP) and EIS controls
Stainless steel (-SS)Special order. Approved for outdoor installation under a patio cover, per the stainless manual
CertificationANSI Z21.60 / CSA 2.26, decorative gas appliances for solid fuel burning fireplaces
BrandGrand Canyon
Burner only, logs not included. Vented use only.Install it in a solid fuel burning fireplace with a working flue, with the damper locked open, and keep any glass doors fully open while it runs. The burner needs a valve or ignition kit before it can run. A licensed gas professional should make the gas connection to the instructions and local codes.

Questions people ask us

Does the see-through burner come with logs?

No. This is the burner kit only, logs not included. The kit comes with lava rock, embers, vermiculite, a flex line, the gas inlet fitting and a damper clamp. Pick a Grand Canyon see-through log set in the same width.

What else do I need to make it work?

A valve or ignition kit, sold separately. See the Grand Canyon ignition kits, or choose the assembled 3 Burner See Through, which ships with the control system factory installed.

Which size fits my see-through fireplace?

Compare your firebox with the Grand Canyon chart above. For example, the 24 inch burner needs at least 36" front width, 14" depth, 36" back width and 16" height.

What is the stainless steel version for?

Grand Canyon builds the -SS versions in stainless steel for outdoor use. The stainless manual approves them for installation outdoors under a patio cover, away from direct water contact and direct sunlight. The patio roof overhang must be at least 50% of the roof height measured from the bottom of the fireplace, and the base of the fireplace at least 2 inches above the floor. Grand Canyon builds the stainless see-through burners to special order, with a lead time of about 2 to 3 weeks.

Not sure which burner fits?

Send us the firebox measurements on both sides and your gas type, and we will check the size and the control with you. Ask us here.

Goes with this

Grand Canyon log setsLogs sized to match the burner Ignition and valve kitsNeeded to run a burner-only kit Assembled see-throughControl system factory installed 2 Burner See ThroughSizes 18" to 60"

Manuals and warranty

Grand Canyon manuals and warranty

Warranty terms come from Grand Canyon and depend on the product. Read the manual and the warranty for your model before you order.

Our warranty library· 2 and 3 Burner See Through manual (PDF)· See Through Stainless Steel manual (PDF)· Minimum fireplace dimensions chart (PDF)· 3 Burner See Through drawings (PDF)
Not sure this is the right burner? Tell us the firebox size on both sides and your gas type, and we will check the burner, logs and control with you before you order. No obligation either way.
Ask us before you order