Skip to product information
1 of 1

Duravent

Duravent DuraTech LDC 30° Elbow, 14", Galvalume | 14DT-E30

Duravent DuraTech LDC 30° Elbow, 14", Galvalume | 14DT-E30

Regular price $924.17
Regular price Sale price $924.17
Sale Sold out
Shipping calculated at checkout.
Duravent DuraTech LDC 30° Elbow, 14", Galvalume | 14DT-E30
View full details

The Duravent DuraTech LDC 14DT-E30 is a single 30 degree elbow for 14 inch DuraTech LDC chimney, with a galvalume outer wall. Two elbows make one offset around a rafter, ridgepole or joist, with an elbow strap between them. It is fastened with screws. Part number 14DT-E30.

30° offsetLargest permitted
Sold eachAn offset uses two
One offsetPer LDC installation
UL 103 Type HT10" to 16" listing

Details

Part number14DT-E30
Diameter14"
Angle30°
Outer wallGalvalume
OffsetsOne offset may be used per installation
SupportElbow strap required between the two elbows
FasteningScrews
ListingUL 103 Type HT (US, 10" to 16"); CAN/ULC-604 (Canada)
BrandDuravent
One offset, 30° maximum.Duravent allows one offset in a DuraTech LDC chimney and no offset greater than 30 degrees. An elbow strap carries the chimney between the elbows.

Questions people ask us

How many do I need?

An offset uses two elbows, one to lean the chimney and one to bring it back to vertical. This listing is one elbow.

Does it need a strap?

Yes. Duravent requires an elbow strap between the two elbows. See the LDC elbow straps and ask us for the 14" size.

What is DuraTech LDC used for?

Duravent lists DuraTech LDC for atmospheric-draft appliances such as certified factory-built or large masonry fireplaces, furnaces, boilers and other solid-fuel, oil or gas appliances. The appliance manual decides which chimney is approved, so send us the model and we will check.

Goes with this

Manuals and warranty

Duravent manuals and warranty

Warranty terms come from Duravent and depend on the product. Read the manual and the warranty for your model before you order.

Our warranty library· DuraTech LDC 10" to 24" catalog (PDF)· DuraTech LDC installation instructions (PDF)
Not sure about the offset? Tell us the appliance, the chimney diameter and how the run is laid out, and we will check the part with you first. No obligation either way.
Ask us before you order