Athena
Athena Fittings and Flex Line Kit, 1/2" x 16" | BAK-1/2FFL
Athena Fittings and Flex Line Kit, 1/2" x 16" | BAK-1/2FFL
The Athena BAK-1/2FFL is a fittings and flex line kit with a 1/2 inch by 16 inch flex line and two 1/2 inch fittings. It is for the gas hookup of a fire feature burner. A licensed gas professional should make the connection. Part number BAK-1/2FFL.
Details
| Part number | BAK-1/2FFL |
|---|---|
| Flex line | 1/2" x 16" |
| Fittings | Two 1/2" fittings |
| Use | Gas connection for a fire feature burner |
| Installation | By a qualified installer, service agency or the gas supplier |
| Brand | Athena |
Questions people ask us
What is in the kit?
A 1/2 inch by 16 inch flex line and two 1/2 inch fittings.
Do I need it with an Athena drop-in pan?
Usually not. Athena drop-in burner pans come with their own flex line and connection fittings. If you bought a burner on its own, such as an Athena fire ring, H-burner or T-burner, ask us whether this kit suits your connection.
Is 16 inches long enough?
It depends on where your gas supply and shutoff sit in relation to the burner. Send us a sketch or photo of your setup and we will check.
Who should install it?
Athena says a qualified installer, service agency or the gas supplier must do installation and service, to the instructions and local codes.
Goes with this
Manuals and warranty
Warranty terms come from Athena and depend on the product. Read the manual and the warranty for your model before you order.
Our warranty libraryAsk us before you order