AquaCal
AquaCal HeatWave SuperQuiet 114,000 BTU Pool Heat Pump | SQ140R
AquaCal HeatWave SuperQuiet 114,000 BTU Pool Heat Pump | SQ140R
AquaCal HeatWave SuperQuiet SQ140R Pool Heat Pump - 114,000 BTU Heat & Cool
Quiet, high-capacity residential pool temperature control with AquaCal HeatWave SuperQuiet® performance, 114,000 BTU heating capacity, built-in PoolSync® Wi-Fi antenna and current-generation Heat, Cool and Auto-Temp operation.
This is not a heat-only unit. The current AquaCal HeatWave SuperQuiet SQ140R provides Heat, Cool and Auto-Temp operating modes, making it a strong choice for homeowners who want quiet performance with year-round temperature flexibility.
The AquaCal HeatWave SuperQuiet SQ140R is the entry point into AquaCal's current HeatWave SuperQuiet lineup, built for quiet residential pool operation while still delivering substantial heating capacity. With 114,000 BTU of heating output, the SQ140R fits nicely for many mid-size residential pool applications where buyers want more output than smaller entry-level heat pumps without stepping all the way into the largest-capacity class.
Unlike older or outdated descriptions that list it as heat-only, the current SQ140R is a heat-and-cool pool heat pump. It can actively heat the pool in cooler weather, cool overheated pool water during the hottest periods, and use Auto-Temp mode to help maintain a more consistent water temperature. It also includes AquaCal's built-in PoolSync® Wi-Fi antenna, allowing connected control and remote monitoring without needing a separate external Wi-Fi antenna for standard PoolSync operation.
Quick Stats
- 114,000 BTU heating capacity
- Commonly considered for many residential pools in the up to approximately 25,000 gallon range, depending on climate, cover use and target temperature
- Heat, Cool and Auto-Temp operation
- SuperQuiet® sound-reduction cabinet design for quieter backyard performance
- Built-in PoolSync® Wi-Fi antenna for connected control and monitoring
- Corrosion-resistant cabinet for long-term outdoor use
- A strong alternative for buyers who want quiet operation without moving to a full inverter platform
Built-In PoolSync® Wi-Fi Antenna
The PoolSync Wi-Fi antenna is built into the SQ140R. For standard PoolSync connectivity, you do not need a separate external Wi-Fi antenna.
- Adjust water temperature remotely
- Switch between Heat, Cool and Auto-Temp modes
- Monitor system operation and status
- Access connected diagnostics and performance information
- Support easier service and troubleshooting
Why the SQ140R Over the T100?
The SQ140R and T100 both heat and cool, but they serve slightly different buyers. The SQ140R is ideal for customers who want more heating output and the benefits of AquaCal's quiet SuperQuiet® platform. The T100 is a better fit for buyers who prioritize full inverter modulation and the efficiency profile that comes with it.
More Raw Heating Capacity
The SQ140R delivers 114,000 BTU of heating capacity, which is higher than the T100's 101,000 BTU rating. For buyers focused on stronger heating output in this size range, the SQ140R has an edge.
Quiet Backyard Performance
AquaCal's HeatWave SuperQuiet® platform is specifically aimed at homeowners who care about lower perceived backyard noise and a more refined equipment-pad experience.
T100 Inverter Advantage
The T100 uses inverter technology to modulate output as heating demand changes, which can improve efficiency and low-load sound performance. Buyers who prioritize modulation may still prefer the T100.
Cooling on Both Platforms
One of the biggest corrections to older listing copy is that the current SQ140R does offer cooling capability. You do not have to step into the TropiCal series just to gain cooling mode.
AquaCal Heat Pump Comparison
| Model | Platform | Heating BTU | Heat + Cool | Typical Pool Size Range | Best For |
|---|---|---|---|---|---|
| T70 | TropiCal® Inverter | 68,000 | Yes | Up to ~15,000 gal | Smaller pools, covered pools and budget-friendly entry into inverter operation |
| T100 | TropiCal® Inverter | 101,000 | Yes | Up to ~25,000 gal | Balanced pick for many residential pools where inverter modulation is desired |
| T130 | TropiCal® Inverter | 123,000 | Yes | Up to ~30,000 gal | Larger pools, faster recovery and buyers who want higher-capacity inverter performance |
|
SQ140R This Model |
HeatWave SuperQuiet® | 114,000 | Yes | Up to ~25,000 gal | Quiet residential performance with more heating output than the T100 and built-in PoolSync® Wi-Fi |
| HW160R | HeatWave® | 128,000 | Yes | ~25,000-35,000 gal | Higher-output residential heating and cooling for larger pools |
| SQ200R | HeatWave SuperQuiet® | 138,000 | Yes | 35,000+ gal | Very large pools, colder climates and buyers wanting maximum SuperQuiet® capacity |
Pool-size ranges are general planning guidelines only. Correct pool heat pump sizing depends on pool surface area, climate, target water temperature, wind exposure, cover use and desired swim season in addition to gallons.
SQ140R Specifications
| Manufacturer | AquaCal |
|---|---|
| Series | HeatWave SuperQuiet® |
| Model | SQ140R |
| Heating Capacity | 114,000 BTU |
| Operation | Heat, Cool and Auto-Temp |
| Connectivity | Built-In PoolSync® Wi-Fi Antenna |
| Platform | HeatWave SuperQuiet® |
| Application | Residential pool heating and cooling |
| Cabinet | Corrosion-resistant outdoor cabinet |
| Installation | Outdoor installation with proper airflow and service clearance |
Frequently Asked Questions
Does the AquaCal SQ140R heat and cool?
Yes. The current AquaCal HeatWave SuperQuiet SQ140R is a heat-and-cool pool heat pump. It offers Heat, Cool and Auto-Temp modes.
Does the SQ140R have a built-in PoolSync antenna?
Yes. The PoolSync Wi-Fi antenna is built in, so a separate external Wi-Fi antenna is not required for standard PoolSync connectivity.
Is the SQ140R a good alternative to the T100?
Yes, especially for buyers who want more raw heating output and AquaCal's quiet SuperQuiet® platform. The T100 remains a strong option for buyers who specifically want inverter modulation.
What size pool is the SQ140R best for?
It is commonly considered for many pools up to approximately 25,000 gallons, but proper sizing should always account for climate, wind exposure, desired temperature, cover use and expected swim season.
How is the SQ140R different from the SQ200R?
The biggest difference is capacity. The SQ140R is the smaller current SuperQuiet® option at 114,000 BTU, while the SQ200R steps up to 138,000 BTU for larger or more demanding applications.
Install Note
Designed for outdoor installation with proper airflow clearance and service access. Water flow, electrical service, equipment placement and drainage should all be confirmed before installation.
Installation should be performed by a qualified professional in accordance with AquaCal's manual and all applicable local electrical and pool-equipment codes.
Need Help Choosing Between the SQ140R, T100 or SQ200R?
If you want help sizing an AquaCal pool heat pump, have your pool dimensions or gallon volume, installation ZIP code, target water temperature, expected swim season and pool-cover information ready. Aqua Terra Backyard can help compare the SQ140R against other AquaCal options and determine the best fit for your application.
