Valcourt
Valcourt Straight Masonry Trim for St-Laurent | VA16DTR
Valcourt Straight Masonry Trim for St-Laurent | VA16DTR
The Valcourt VA16DTR is a black straight masonry trim for the St-Laurent FP16D linear wood fireplace, giving a flush finish with brick or stone. The FP16D needs one faceplate: this masonry trim or the straight narrow overlap VA16FE06 for thin facing. The trim is screwed to the fireplace before the cement board and facing go on.
Details
| Part number | VA16DTR |
|---|---|
| Description | Black straight masonry trim (flush finish with brick or stone) |
| Fits | Valcourt St-Laurent FP16D linear wood fireplace |
| Requirement | One faceplate is required on the FP16D: VA16DTR or VA16FE06 |
| Facing over 3/8" | Non-combustible facing thicker than 3/8" is installed before the fireplace, per the FP16D manual |
| Sequence | Fasten the trim, then the cement board, then the facing against the trim |
| Brand | Valcourt (SBI) |
Questions people ask us
Masonry trim or narrow overlap?
Choose the masonry trim for brick or stone set flush with the fireplace. For thin facing such as tile, Valcourt offers the straight narrow overlap VA16FE06.
Is a trim required on the St-Laurent?
Yes. The FP16D manual says you must install one of the two faceplates, sold separately.
When does it go on?
The trim is fastened to the fireplace first, then the cement board and the non-combustible facing are installed against it. If the facing is thicker than 3/8", the manual has you install it before the fireplace.
Not sure about your facing?
Tell us the material and thickness and we will check it against the manual.
Goes with this
Manuals and warranty
Warranty terms come from Valcourt and depend on the product. Read the manual and the warranty for your model before you order.
Our warranty libraryยท VA16DTR masonry trim installation instructions (PDF)ยท St-Laurent FP16D install and owner's manual (PDF)Ask us before you order