Skip to product information
1 of 1

Skytech

Skytech On/Off Remote Control, Push Button Fireplace Control | SKY7001

Skytech On/Off Remote Control, Push Button Fireplace Control | SKY7001

Regular price $191.00
Regular price $229.20 Sale price $191.00
Sale Sold out
Shipping calculated at checkout.
Skytech On/Off Remote Control, Push Button Fireplace Control | SKY7001
View full details

The Skytech SKY7001 (model 7001) is a one-button on/off fireplace remote: tap once for on, tap twice for off. The transmitter and receiver both run on batteries, and the receiver wires to a millivolt gas valve or, through a 24VAC transformer, to an electronic spark ignition module.

One buttonSingle tap on, double tap off
Battery operatedTransmitter and receiver
Learns 2 moreAdditional Skytech transmitters
About 20 ftOperating range per Skytech

Details

ModelSKY7001
TransmitterSingle push button with green and red LED ring, one CR2450 3V battery (Skytech rates about 3 years)
Receiver4 x AA batteries, OFF / REMOTE / ON switch, learns up to two additional Skytech transmitters
Works withMillivolt gas valves; electronic spark ignition through a 24VAC transformer, as the instructions show
RangeAbout 20 feet
Frequency433.92 MHz
Security codesOne of 10,000,000
Valve wiring18 gauge solid or stranded, no splices, 20 feet or less
MountingAdhesive tape or screws for the transmitter, included
BrandSkytech
Do not connect the valve or module to house power.Skytech warns against wiring any gas valve or electronic module directly to 110 to 120VAC. Keep the receiver where the inside of its case stays below 130 degrees F, and leave the transmitter selector switch on position 1.

Questions people ask us

How do I use it?

Tap the button once and the fireplace comes on, with one green blink. Tap twice to turn it off, with two red blinks. The receiver has to be set to REMOTE to answer the transmitter.

What batteries does it use?

The transmitter uses one CR2450 3 volt button cell, which Skytech rates for about 3 years; a red blink every 4 seconds means it is getting low. The receiver takes four AA alkaline batteries, so check them once a year.

Can I add more remotes?

Yes. The receiver can learn up to two additional Skytech transmitters.

Will it work with my fireplace?

It is built for millivolt gas valves, and Skytech also shows an electronic spark ignition hookup through a 24VAC transformer. Your fireplace manual decides which remotes are approved, so send us the model and we will check.

Goes with this

Manuals and warranty

Skytech manuals and warranty

Warranty terms come from Skytech and depend on the product. Read the manual and the warranty for your model before you order.

Our warranty library
Not sure this is the right remote? Send us your fireplace or valve model and we will check the remote before you order. No obligation either way.
Ask us before you order