Skip to product information
1 of 3

Skytech

Skytech Programmable Fireplace Remote System, Thermostat, Timer & 7-Day Program | SKY3003P

Skytech Programmable Fireplace Remote System, Thermostat, Timer & 7-Day Program | SKY3003P

Regular price $366.00
Regular price $439.20 Sale price $366.00
Sale Sold out
Shipping calculated at checkout.
Skytech Programmable Fireplace Remote System, Thermostat, Timer & 7-Day Program | SKY3003P
View full details

The Skytech SKY3003P is a battery operated programmable thermostat remote system with an LCD transmitter and a matching receiver. It can run the fireplace by room temperature, on a countdown timer of up to 9 hours, or on a 7 day program with 4 periods a day. The receiver connects to a millivolt gas valve, or to an electronic spark ignition system through a 24VAC transformer.

7 day program4 periods per day
LCD displayRoom and set temperature
All batteryTransmitter and receiver
About 20 ftOperating range

Details

ModelSKY3003P
TypeProgrammable thermostat RF remote system
TransmitterLCD in degrees F or C, 24 hour clock, flame and low battery indicators, child safety lockout, 2 x AAA batteries
ReceiverBattery operated, 4 x AA batteries, wired to the valve
Works withMillivolt gas valves; electronic spark ignition through a 24VAC transformer
ThermostatSet from 45 to 99 degrees F, swing adjustable from 1 to 3 degrees
Timer and programCountdown from 15 minutes up to 9 hours; 7 day program, 4 periods a day, start times in 15 minute steps
RangeAbout 20 feet
Security codes1,048,576
In the boxTransmitter, receiver, wall plate, batteries, hardware bag, instructions
BrandSkytech
Do not connect the gas valve to house power.Skytech warns against wiring any gas valve or electronic module directly to 110 to 120VAC, and calls for 18 gauge wire no longer than 20 feet between the receiver and the valve. Keep the receiver case below 130 degrees F; at that temperature it shuts the appliance down and beeps.

Questions people ask us

What kind of fireplace can it control?

The receiver connects to a millivolt gas valve, and Skytech shows a hookup for electronic spark ignition through a 24VAC transformer. Your fireplace manual has the final say, so send us the model and we will check.

How does the program work?

It comes with a factory program covering 7 days with 4 periods a day, each with its own on time and temperature. You can change the start times in 15 minute steps. The countdown timer is not available while the program is running.

What if the receiver stops hearing the remote?

The transmitter checks in every 15 minutes. If the receiver misses those signals for 2 hours, it shuts the appliance off and beeps until the signal comes back.

What batteries does it take?

The transmitter uses two AAA batteries and the receiver uses four AA batteries. Skytech recommends alkaline, and heat near the fireplace shortens battery life.

Not sure the SKY3003P suits your fireplace?

Send us the fireplace or valve model and we will confirm it before you order. Ask us here.

Goes with this

Manuals and warranty

Skytech manuals and warranty

Warranty terms come from Skytech and depend on the product. Read the manual and the warranty for your model before you order.

Our warranty library· 3003P instructions (PDF)
Not sure this is the right remote? Send us your fireplace or gas valve model and we will check the remote before you order. No obligation either way.
Ask us before you order