PAL Lighting Treo Micro Multi-Color Nicheless Pool & Spa Light, 80' Cord & Plug | 64-EGMIC-80

The PAL Lighting 64-EGMIC-80 Treo Micro is a compact multi-color underwater LED light engineered for pool and spa applications where a discreet, low-profile lighting solution is preferred.

Unlike traditional full-size pool lights that require a large niche, the Treo Micro uses a miniature nicheless design that can be incorporated into pool walls, spa shells, steps, benches, tanning ledges, and other water features.

The 64-EGMIC-80 configuration includes an 80-foot factory cable and plug, providing additional installation flexibility for equipment pads located farther from the light location.

The Treo Micro is designed for use with a compatible PAL 24VDC lighting driver and control system. It can be installed in gunite, fiberglass, and vinyl pool or spa applications when used with the correct PAL fitting or adapter.

PAL has produced multiple generations of lighting controls and electrical configurations. When replacing an existing PAL light, verify the existing driver, controller, voltage, plug configuration, and installation fitting before ordering.

• PAL Treo Micro multi-color nicheless LED light
• 80-foot factory cable
• Factory plug connection

A PAL driver, transformer, controller, wall fitting, conduit adapter, dress ring, and other installation accessories are not included unless specifically stated in the product listing.

PAL specifies the Treo Micro for nicheless installation through 1-inch Schedule 40 PVC pipe or a standard 1-1/2-inch wall fitting when used with the appropriate PAL accessory.

The compact format makes Treo Micro particularly useful for pool steps, benches, spas, tanning ledges, and other locations where a traditional full-size light would be impractical.

Pool and spa lighting is electrical equipment installed in a wet environment. Installation must follow PAL instructions and all applicable national and local electrical codes.

When connected to a compatible PAL Color Touch driver and control system, Treo Micro multi-color lights can provide customizable underwater lighting with control over color, brightness, speed, and lighting modes.

Compatible PAL systems can also provide synchronization between multiple PAL lights and control through supported remote or smart device interfaces.

PAL Color Touch systems may also support integration with compatible Hayward, Jandy, and Pentair pool automation systems when configured with the appropriate PAL equipment.

What is the PAL 64-EGMIC-80?
The 64-EGMIC-80 is a PAL Treo Micro multi-color nicheless LED pool and spa light supplied with an 80-foot cable and plug.

What voltage does the PAL Treo Micro use?
The current Treo Micro platform operates at 24VDC and requires a compatible PAL driver.

How much power does the 64-EGMIC-80 use?
PAL rates the Treo Micro at approximately 0.9348 watts with a total light output of approximately 27 lumens.

How large is the PAL Treo Micro?
PAL specifies an approximately 1.5-inch lens diameter and a body length of approximately 2.25 inches.

Does the 64-EGMIC-80 include the cord?
Yes. This specific configuration includes an 80-foot factory cable and plug.

Can the Treo Micro be installed in a fiberglass or vinyl pool?
Yes. PAL specifies the Treo Micro for gunite, fiberglass, and vinyl applications when installed with the correct fitting or adapter.

Does the light include a PAL controller or driver?
No. The 64-EGMIC-80 is the light with its 80-foot cable and plug. A compatible 24VDC PAL driver and any desired control equipment are separate unless expressly included elsewhere in the listing.

Can I use this to replace an older PAL Treo Micro?
It may be suitable, but the existing PAL driver, controller, voltage, plug connection, wall fitting, and wiring configuration should be verified before replacement. Similar-looking PAL lights can use different system configurations.