PAL Lighting Full Lamp Repair Kit for PAL-2T4 & PAL-2L4 4-Wire Lights | 42-4FLRK

Designed for use with:

• Compatible PAL-2T4 series pool and spa lights
• Compatible PAL-2L4 series pool and spa lights
• PAL 4-wire lighting configurations associated with these models

Please verify before ordering: Check the model number and wiring configuration of the existing PAL fixture. A similar appearance does not guarantee compatibility between different PAL lighting generations.

If your existing fixture is a different PAL model or uses a different wiring configuration, confirm the correct replacement part before installation.

The PAL 42-4FLRK is intended as a service repair solution for compatible PAL-2T4 and PAL-2L4 light assemblies.

Common reasons for replacing a lamp assembly may include:

• A failed or non-functioning lamp assembly
• Intermittent operation traced to the existing light assembly
• Service of an older compatible PAL 4-wire fixture
• Restoring a compatible fixture without replacing an otherwise serviceable installation

Proper troubleshooting should be performed before replacing parts, since a lighting problem can also originate from the power supply, controller, wiring, connections, or other components in the lighting system.

Pool and spa lighting is electrical equipment installed in a wet environment. Installation and troubleshooting should be performed in accordance with PAL instructions, the National Electrical Code, and applicable local electrical requirements.

• Disconnect power before servicing the lighting system.
• Confirm the fixture model and wiring configuration before installation.
• Inspect sealing surfaces and associated components during service.
• Ensure all required seals are properly seated during reassembly.
• Do not connect a low-voltage PAL pool light directly to a 120V circuit.

When there is uncertainty regarding the existing installation, installation by a qualified pool technician or electrician is recommended.

What is PAL part number 42-4FLRK?

PAL 42-4FLRK is a Full Lamp Repair Kit designed for compatible PAL-2T4 and PAL-2L4 series pool and spa lights.

Does the PAL 42-4FLRK fit a PAL-2T4 light?

Yes. The 42-4FLRK is specifically identified by PAL for the PAL-2T4 / PAL-2L4 family. The existing light should still be verified as the compatible 4-wire configuration.

Does the PAL 42-4FLRK fit a PAL-2L4 light?

Yes. PAL identifies the 42-4FLRK as a repair kit for compatible PAL-2T4 and PAL-2L4 lights.

Is 42-4FLRK a 4-wire PAL repair kit?

Yes. This repair kit is associated with PAL's 4-wire lighting configuration. Always verify the existing fixture before ordering because PAL has produced different lighting generations.

Do I have to replace the entire PAL pool light?

Not necessarily. Compatible PAL fixtures were designed with serviceable lamp components, and the 42-4FLRK provides a repair path for the applicable lamp assembly. The condition of the remaining fixture, wiring, seals, controller, and power supply should still be evaluated.

Can I use 42-4FLRK on any PAL pool light?

No. Do not choose a replacement based only on the appearance of the light. This kit is intended for compatible PAL-2T4 and PAL-2L4 4-wire systems. Other PAL models or wiring generations may require a different replacement part.

What should I check before ordering?

Verify the existing PAL model number, determine whether the fixture is a 4-wire configuration, and confirm that the repair kit matches the installed lighting system.