Osburn
Osburn Matrix 2700 Wood Insert
Osburn Matrix 2700 Wood Insert


The Osburn Matrix 2700 (OB02700) is a non-catalytic wood insert for an existing masonry fireplace, rated for 750 to 2,200 sq ft with a maximum heat output of 80,000 BTU/h. It has a large 24 3/8" x 12 5/8" ceramic glass view, a 2.5 cu ft firebox for logs up to 20" long, and an average particulate rate of 1.2 g/h. A cast iron faceplate and a 176 CFM heat-activated blower come standard.
Specifications
| Model | Osburn Matrix 2700 wood insert, OB02700 |
|---|---|
| Heat output | 80,000 BTU/h maximum (dry cordwood); overall 12,700 to 60,700 BTU/h |
| Heating area | 750 to 2,200 sq ft |
| Efficiency | 64% average overall (HHV), 68% (LHV); 70% optimum overall |
| Emissions | 1.2 g/h average particulate, non-catalytic |
| Test standard | EPA 2020 approved; tested to ASTM E3053-17 under 40 CFR Part 60, Subpart AAA; efficiency by the CSA B415.1-10 stack loss method |
| Firebox | 2.5 cu ft overall (1.94 cu ft EPA loading volume); 12 3/8" H x 22 5/8" W x 12 7/8" D |
| Burn time and logs | Up to 8 hours; logs up to 20" long, loaded across the width |
| Overall size | 30 1/8" H x 43 5/8" W x 27 1/4" D |
| Minimum fireplace opening | 27 1/8" H x 31 3/4" W x 22 1/8" D |
| Flue | 6" outlet; continuous 6" liner (UL 1777), 15 ft minimum total system height from the floor |
| Clearances (US) | Side mantle 9 1/2", top mantle 12", side wall 19", 84" to the top from the platform; floor protection 16" in front |
| Shipping weight | 535 lb |
| Brand | Osburn (SBI) |
Questions people ask us
What do I need to order with the Matrix 2700?
Osburn lists a cast iron door overlay in black or brushed nickel as required, sold separately. The cast iron faceplate and blower come standard. A 34" x 50" cuttable faceplate, a projection kit and a firescreen door are options. See trims and fronts and doors and screens.
How much area will it heat?
Osburn recommends it for 750 to 2,200 sq ft, with up to 80,000 BTU/h from dry cordwood.
Can the Matrix 2700 go in a factory-built fireplace?
No. Osburn states that its wood-burning inserts must only be installed inside an existing masonry fireplace with a lined masonry chimney, never in a factory-built (zero clearance) fireplace or any wooden or combustible structure.
What chimney liner does it need?
A continuous 6" liner from the insert to the top of the chimney, listed to UL 1777 in the US. The total system height from the floor should never be less than 15 ft.
Will it fit my fireplace?
The minimum opening is 27 1/8" H x 31 3/4" W x 22 1/8" D. Send us your measurements and we will check it with you. Ask us here.
Goes with this
Manuals and warranty
Warranty terms come from Osburn and depend on the product. Read the manual and the warranty for your model before you order.
Our warranty libraryยท Osburn Matrix 2700 install and owner's manual (PDF)ยท Osburn Matrix 2700 dimensions (PDF)ยท Cuttable faceplate and projection kit instructions (PDF)Ask us before you order
