IHP
IHP Snap-Pak Roof Flashing
IHP Snap-Pak Roof Flashing
IHP Snap-Pak roof flashing seals the roof opening where a Snap-Pak chimney passes through. Choose the flat roof flashing for the 6" system (6SPFF) or the 7" system (7SPFF), or the 7" flashing for roof pitches from 2/12 to 5/12 (7SPF5). A storm collar sealed at the top edge completes the job.
Details
| Models | 6SPFF (F3976) 6" flat, 7SPFF (F4004) 7" flat, 7SPF5 (F4005) 7" 2/12 to 5/12 |
|---|---|
| Diameters | 6" or 7" Snap-Pak |
| Roof pitch | Flat, or 2/12 to 5/12 (7SPF5) |
| Roof opening | Keep a 2" air space around the chimney |
| Storm collar | Install above the flashing and caulk at the flashing edge |
| Oil or coal appliances | Flashing and storm collar must be stainless steel or aluminum |
| Brand | IHP (Innovative Hearth Products) |
Questions people ask us
Which flashing fits my roof?
Flat roofs take the flat flashing. The 7" 7SPF5 covers pitches from 2/12 to 5/12. For a steeper roof, ask us for the matching flashing.
Is the storm collar included?
No. Order the storm collar for your diameter separately. For the 7" system that is 7SPSC.
How big is the roof opening?
Keep a 2" air space around the chimney through the roof, as the Snap-Pak instructions call for.
How high must the chimney go?
At least 3 ft above the roof opening and 2 ft higher than anything within 10 ft, the ten foot rule in the instructions.
Goes with this
Manuals and warranty
Warranty terms come from IHP and depend on the product. Read the manual and the warranty for your model before you order.
Our warranty library· Snap-Pak installation and maintenance instructions (PDF)· Snap-Pak smart sheet (PDF)Ask us before you order