Skip to product information
1 of 1

Flare

Flare Reflective Side Panels for See-Through, 30" Glass | RBS-ST-EH

Flare Reflective Side Panels for See-Through, 30" Glass | RBS-ST-EH

Regular price $312.00
Regular price Sale price $312.00
Sale Sold out
Shipping calculated at checkout.
Flare Reflective Side Panels for See-Through, 30" Glass | RBS-ST-EH
View full details

Flare RBS-ST-EH is the black reflective ceramic glass side panel set for Flare See-Through direct vent fireplaces with 30 inch extra high glass (the -EH models). The sides use the same high temperature Neo-Ceram glass-ceramic as Flare's reflective back, so the flame and media reflect off the ends of the firebox instead of the standard matte black. Flare recommends side panels for see-through, corner and passage models.

Reflective sidesFlame and media reflect off the ends
Neo-CeramHigh temperature glass-ceramic
30" glassGlass height it is made for
Add any timeBefore or after the fireplace is installed

Details

Part numberRBS-ST-EH
FitsFlare See-Through models with 30" glass (-EH)
Fireplace typeDirect vent (indoor)
MaterialNeo-Ceram high temperature glass-ceramic
FinishBlack, reflective when lit, satin black when off
MountingHeld by the reflective side holder clips
Install toolsPhillips screwdriver and suction cups, two people
CareAmmonia-free glass cleaner
BrandFlare Fireplaces
Handle the glass with two people.Seat each panel in its channel and refit the clips. Glass that is not clipped in can tip forward and break.

Questions people ask us

Which fireplaces does RBS-ST-EH fit?

Flare See-Through direct vent fireplaces with 30 inch extra high glass (the -EH models). Send us the model from the rating plate and we will confirm before you order.

Why sides and not a back on a see-through?

A see-through has glass on both long faces, so there is no back wall to cover. Flare lists its reflective back holder as not available on see-through models; the side panels dress the two ends instead.

How are the side panels installed?

Flare's manual uses two people, suction cups and a Phillips screwdriver: remove the clips, seat the glass in its lower channel, push it back against the fireplace and refit the clips without overtightening.

How do I clean them?

Use an ammonia-free glass cleaner with the fireplace off and cool, and keep media out of the glass channels.

Goes with this

Manuals and warranty

Flare manuals and warranty

Warranty terms come from Flare and depend on the product. Read the manual and the warranty for your model before you order.

Our warranty libraryยท Installation manual, direct vent models (PDF)
Not sure these are the right side panels? Tell us which Flare fireplace you have, or are about to install, and we will check the fit with you first. No obligation either way.
Ask us before you order