• Flare linear gas fireplace burning with a black ceramic reflective back panel, the look of part RB-FF-80
  • For comparison, a Flare fireplace burning without a reflective panel, showing the standard matte black back
1 2

Flare

Flare Reflective Back Panel for Front Facing 80, 16" Glass | RB-FF-80

Flare Reflective Back Panel for Front Facing 80, 16" Glass | RB-FF-80

$791.00
$791.00
Sale Sold out
Shipping calculated at checkout.
Flare Reflective Back Panel for Front Facing 80, 16" Glass | RB-FF-80
View full details

Flare RB-FF-80 is the black reflective ceramic glass back for the Flare-FF-80, the 80 inch front facing direct vent fireplace with regular 16 inch glass. It takes the place of the standard matte black back with Flare's high temperature Neo-Ceram glass-ceramic, which reflects the flame and media when the fire is on and reads as satin black when it is off. This is the panel for the vented indoor model, not the vent free outdoor range.

Reflects the flameFlare says it doubles the visible flame
Neo-CeramHigh temperature glass-ceramic
Satin blackHow it looks with the fire off
Add any timeBefore or after the fireplace is installed

Details

Part numberRB-FF-80
FitsFlare-FF-80 (80" front facing, 16" glass)
Fireplace viewing window80 1/4" W x 16" H
Fireplace typeDirect vent (indoor)
MaterialNeo-Ceram high temperature glass-ceramic
FinishBlack, reflective when lit, satin black when off
MountingSits in the lower channel, held with the reflective back holder clips
Install toolsPhillips screwdriver and suction cups, two people
CareAmmonia-free glass cleaner
BrandFlare Fireplaces
Handle the glass with two people.Flare's instructions set each panel in its lower channel with suction cups and secure it with the clips. Glass that is not clipped in can tip forward and break.

Questions people ask us

Which fireplace does RB-FF-80 fit?

The Flare-FF-80: 80" front facing, 16" glass, 80 1/4" x 16" viewing window. Other lengths and glass heights take their own reflective back.

Will it work in a Flare vent free outdoor fireplace?

No. This is the direct vent panel. Flare makes separate reflective backs for its vent free outdoor models, with VF in the part number.

How is it installed?

Flare's manual uses two people, suction cups and a Phillips screwdriver. Remove the clips, set the glass into its lower channel at an angle, push the top edge back and refit the clips. Do not overtighten; the spring is meant to flex. Unsecured glass can lean forward and break.

Do I need side panels too?

Flare applies the back panel to all units and recommends side panels mainly for see-through, corner and passage models. Ask us if you want to add sides to this fireplace.

How do I clean it?

Use an ammonia-free glass cleaner with the fireplace off and cool, and check that no media has dropped into the glass channels before you relight.

Goes with this

Reflective backs and panelsFlare firebox panels Flare gas fireplacesDirect vent and outdoor models Check my fitSend us your model and serial

Manuals and warranty

Flare manuals and warranty

Warranty terms come from Flare and depend on the product. Read the manual and the warranty for your model before you order.

Our warranty libraryยท Installation manual, direct vent models (PDF)
Not sure this is the right reflective back? Tell us which Flare fireplace you have, or are about to install, and we will check the fit with you first. No obligation either way.
Ask us before you order