• The inside of a Flare fireplace glowing red from the Flare multicolor RGB LED light kit beneath the burner
  • Flare frameless linear fireplace with the multicolor RGB LED lights on
1 2

Flare

Flare Multicolor RGB LED Light Kit

Flare Multicolor RGB LED Light Kit

$307.00
$307.00
Sale Sold out
Shipping calculated at checkout.
Flare Multicolor RGB LED Light Kit
View full details

The Flare multicolor RGB LED light kit lights the inside of a Flare fireplace, beneath the burner, in any color on the spectrum. A touch remote is included, with a color wheel, dimming and strobe, cycle and rotate effects, and the controller remembers your color. Choose the kit by fireplace size, LED-RGB-45 to LED-RGB-100, or PASS-RBG-LED for the Passage.

Touch remoteIncluded with every kit
Full RGBColor wheel and effects
24V DCPower adapter for the strips
Runs on its ownSeparate from the flame

Specifications

Part numbersLED-RGB-45, LED-RGB-50, LED-RGB-60, LED-RGB-70, LED-RGB-80, LED-RGB-100, PASS-RBG-LED (Passage)
LocationInside the firebox, beneath the burner
RemoteTouch remote, 110 x 52 x 20 mm, 2 AAA batteries
Controller85 x 45 x 23 mm, DC 12V to 24V input, 3 channel RGB, 6A max per channel
Strip power24V DC power adapter
EffectsColor wheel, dim, strobe, cycle, rotate, color memory
Power optionsStandard: adapter powered from the fireplace receiver. Optional: independent power with its own 3 prong plug, requested before ordering
Indoor modelsFront facing, see through, corner, Room Definer, Passage and Traditional
Home automationCan be connected and controlled separately from the fireplace
BrandFlare Fireplaces
Check the power before you order.Flare notes that a safety screen unit with RGB LEDs needs an additional 110V, 15A power source, while a double glass unit needs none. If you want the lights to run without the fireplace on, Flare configures independent power with its own plug, which must be requested before ordering. A licensed electrician should handle any new circuit.

Questions people ask us

Which kit do I need?

Order the kit that matches your fireplace size: 45", 50", 60", 70", 80" or 100". The Passage has its own kit, PASS-RBG-LED. If you are not sure of the size, send us the model.

Is my fireplace LED ready?

Flare says most of its indoor units ship LED ready, with the strips pre-installed at the factory. Send us your model and serial number and we will confirm what your unit has before you order.

Do the lights work with the fireplace off?

With the standard setup, the LED power adapter runs from the fireplace receiver. Flare can configure independent power with a 3 prong plug so the lights work regardless of the fire. Ask for it before ordering.

What about outdoor Flare models?

Flare's outdoor vent free models come with the LED kit installed and enabled by default, and the lights come on with the fireplace.

How do I re-pair the LED remote?

Flare's install manual covers pairing for both remote generations, and Flare posts step by step videos on its FAQ page.

Goes with this

Controls and remotesFlare controls and parts 1/2" Fire GlassFour colors, 10 lb bags Flare FireplacesFireplaces, media and parts Ask about fitWe check your model first

Manuals and warranty

Flare manuals and warranty

Warranty terms come from Flare and depend on the product. Read the manual and the warranty for your model before you order.

Our warranty library· Install manual, SIT ProFlame II, RGB LED section (PDF)
Not sure this is the right LED kit? Send us your Flare model and size and we will confirm the kit and the power setup before you order. No obligation either way.
Ask us before you order