Duravent
Duravent DirectVent Pro Wall Thimble
Duravent DirectVent Pro Wall Thimble
The Duravent DirectVent Pro wall thimble is a through-wall pass-through and firestop for horizontal DirectVent Pro runs, in 4" x 6-5/8" (46DVA-WT) and 5" x 8" (58DVA-WT). Duravent pairs this thimble with the square horizontal termination cap only.
Details
| Part numbers | 46DVA-WT (4" x 6-5/8"), 58DVA-WT (5" x 8") |
|---|---|
| Use | Wall pass-through and firestop for horizontal terminations |
| Cap | For use with the DirectVent Pro square horizontal termination cap only |
| Other caps | Duravent makes small wall thimbles (46DVA-WTS, 58DVA-WTS) for round, sconce and H2 caps |
| Product line | DirectVent Pro, Duravent's co-axial (concentric) direct vent system |
| Listed for | Direct vent gas or propane stoves, heaters and fireplaces approved for DirectVent Pro |
| Brand | Duravent |
Questions people ask us
Will it work with a sconce cap?
No. Duravent matches the sconce, round and H2 caps to its small wall thimble (46DVA-WTS or 58DVA-WTS). Ask us for that part.
Is a wall thimble required?
The appliance manufacturer decides. Duravent says a wall thimble or wall firestop may be required as additional thermal protection for the wall.
Which cap goes with it?
The DirectVent Pro square horizontal termination cap in the same diameter.
Not sure this is the right wall thimble?
Send us the appliance make and model and a short description of the vent run, and we will confirm the part numbers before you order. Ask us here.
Goes with this
Manuals and warranty
Warranty terms come from Duravent and depend on the product. Read the manual and the warranty for your model before you order.
Our warranty library· DirectVent Pro installation instructions (PDF)· DirectVent Pro catalog (PDF)Ask us before you order