• Duravent DirectVent Pro direct vent pipe components
1 1

Duravent

Duravent DirectVent Pro Roof Flashing

Duravent DirectVent Pro Roof Flashing

$85.92
$85.92
Sale Sold out
Shipping calculated at checkout.
Duravent DirectVent Pro Roof Flashing
View full details

Duravent DirectVent Pro roof flashing seals the roof where a vertical DirectVent Pro run passes through, in 4" x 6-5/8" and 5" x 8". Pick the style by roof: adjustable 0/12 to 6/12, steep 7/12 to 12/12, flat roof, or dead soft aluminum that forms to metal and tile roofs. Part numbers F6, F12, FF, F6DS and F12DS in the 46DVA and 58DVA series.

0/12 to 12/12Plus a flat roof style
Two diameters4" x 6-5/8" and 5" x 8"
Dead soft aluminumForms to metal or tile roofs
Storm collar on topSold separately

Details

Part numbers46DVA-F6, F12, FF, F6DS; 58DVA-F6, F12, FF, F6DS, F12DS
F6Adjustable flashing, 0/12 to 6/12 pitch
F12Steep roof flashing, 7/12 to 12/12 pitch
FFFlat roof flashing
F6DS / F12DSDead soft aluminum flashing for metal or tile roofs, 0/12 to 6/12 or 7/12 to 12/12
InstallationRoofing overlaps the top edge; non-hardening sealant between flashing and roofing
NeedsA DirectVent Pro storm collar above the flashing
Product lineDirectVent Pro, Duravent's co-axial (concentric) direct vent system
BrandDuravent
Finish it with a storm collar.Duravent's instructions slide the storm collar down to the top of the flashing and seal it to the pipe with non-hardening sealant. Minimum vent height above the roof depends on pitch; check the instructions and the appliance manual.

Questions people ask us

Which flashing fits my roof?

Measure the pitch. Up to 6/12 use F6, 7/12 to 12/12 use F12, and a flat roof uses FF. On metal or tile roofs, the dead soft aluminum versions can be shaped to the roof profile.

Do I need a storm collar?

Yes. The storm collar sits on top of the flashing and keeps water out of the joint. Order the DirectVent Pro storm collar in the same diameter.

How is it sealed to the roof?

Nail the base, lap the roofing over the top edge, and use a non-hardening sealant between the flashing and the roofing, as Duravent's instructions describe.

Not sure this is the right flashing?

Send us the appliance make and model and a short description of the vent run, and we will confirm the part numbers before you order. Ask us here.

Goes with this

All DirectVent Pro parts4" x 6-5/8" and 5" x 8" Storm collarSeals the pipe to the flashing High-wind vertical capFor roof terminations Ask us to check fitSend the appliance model

Manuals and warranty

Duravent manuals and warranty

Warranty terms come from Duravent and depend on the product. Read the manual and the warranty for your model before you order.

Our warranty library· DirectVent Pro installation instructions (PDF)· DirectVent Pro catalog (PDF)
Not sure which flashing suits your roof? Send us the roof pitch, the roofing material and the vent size, and we will pick the flashing. No obligation either way.
Ask us before you order