Duravent
Duravent DirectVent Pro Low-Profile Vertical Termination Cap
Duravent DirectVent Pro Low-Profile Vertical Termination Cap
The Duravent DirectVent Pro low-profile vertical cap is an aluminum roof termination for 4" x 6-5/8" (46DVA-VC) and 5" x 8" (58DVA-VC) runs. It sits low on the pipe above the roof, exhausting flue gases and drawing in combustion air at the same point.
Details
| Part numbers | 46DVA-VC (4" x 6-5/8"), 58DVA-VC (5" x 8") |
|---|---|
| Type | Low-profile vertical termination cap |
| Material | Aluminum |
| Approval | Confirm with the appliance manufacturer |
| Other finish | Duravent also makes a stainless version (-S) |
| Roof parts | Used with DirectVent Pro roof flashing and storm collar |
| Product line | DirectVent Pro, Duravent's co-axial (concentric) direct vent system |
| Brand | Duravent |
Questions people ask us
Low-profile or high-wind?
Use the cap your appliance manual names. Duravent also makes a high-wind vertical cap for windy sites.
What else goes on the roof?
A roof flashing for your pitch and a storm collar in the same diameter.
Will DirectVent Pro work with my fireplace or stove?
DirectVent Pro is listed together with the appliance, so the appliance manual decides whether it is approved, which parts to use and how long the run can be. Duravent says it is specified by most major U.S. and Canadian stove and fireplace makers. If your manual does not name DirectVent Pro, send us the model and we will check.
Not sure this is the right cap?
Send us the appliance make and model and a short description of the vent run, and we will confirm the part numbers before you order. Ask us here.
Goes with this
Manuals and warranty
Warranty terms come from Duravent and depend on the product. Read the manual and the warranty for your model before you order.
Our warranty libraryยท DirectVent Pro installation instructions (PDF)ยท DirectVent Pro catalog (PDF)Ask us before you order