Duravent
Duravent DuraPlus Tee Support Bracket, 6" | 6DP-TSB
Duravent DuraPlus Tee Support Bracket, 6" | 6DP-TSB
The Duravent DuraPlus 6DP-TSB is a tee support bracket for 6 inch DuraPlus through-the-wall chimney. It is suspended from the outside wall, carries the tee and has a built-in starter section. Duravent rates it to support up to 35 feet of DuraPlus chimney.
Details
| Part number | 6DP-TSB |
|---|---|
| Diameter | 6" |
| Finish | Galvanized |
| Use | Supports the tee, suspended from a wall |
| Built in | Starter section |
| Supports | Up to 35 ft of DuraPlus chimney |
| Brand | Duravent |
Questions people ask us
How much chimney will it hold?
Duravent rates it to support up to 35 feet of DuraPlus chimney.
Is the tee included?
No. The tee with cap is sold separately. Wall straps and a wall thimble are also needed.
How high does the chimney need to go?
Duravent's instructions quote NFPA 211: at least 3 feet above the point where it passes through the roof and 2 feet higher than any part of the building within 10 feet. DuraPlus may be installed up to 35 feet high, and an Extended Roof Bracket is required if it runs more than 4 feet above the roof.
Goes with this
Manuals and warranty
Warranty terms come from Duravent and depend on the product. Read the manual and the warranty for your model before you order.
Our warranty library· DuraPlus installation instructions (PDF)· DuraPlus catalog (PDF)· DuraPlus install guide (PDF)Ask us before you order