• Bromic Bh3130097 1 Platinum Smart Heat Electric Legacy Smart Heat Link Controller Heater Controls
  • Bromic Bh3130097 1 Platinum Smart Heat Electric Legacy Smart Heat Link Controller Heater Controls
  • Bromic Bh3130097 1 Platinum Smart Heat Electric Legacy Smart Heat Link Controller Heater Controls
  • Bromic Bh3130097 1 Platinum Smart Heat Electric Legacy Smart Heat Link Controller Heater Controls
1 4

Bromic

Bromic Platinum Smart-Heat Electric Legacy Link Controller, RS232 Home Integration | BH3130097-1

Bromic Platinum Smart-Heat Electric Legacy Link Controller, RS232 Home Integration | BH3130097-1

$373.00
$428.95 $373.00
Sale Sold out
Shipping calculated at checkout.
âš  Discontinued Legacy Control
The Bromic BH3130097-1 Smart-Heat Legacy Link Controller has been discontinued as part of Bromic's previous-generation control platform. This RS232-based integration module is not part of Bromic's current Affinity Smart-Heat control system.
Bromic Smart-Heat Legacy Link Controller | RS232 Home Integration | BH3130097-1

The Bromic BH3130097-1 Smart-Heat Link is a legacy home-automation interface originally designed to connect compatible Bromic Smart-Heat controllers with third-party automation systems using an RS232 communication connection.

The Smart-Heat Link receives commands from a compatible home automation platform and relays those commands wirelessly to paired Bromic heater controllers. It was commonly used in professionally integrated residential and commercial installations where Bromic outdoor heating needed to operate alongside centralized lighting, AV, automation, or building-control systems.

Product at a Glance
  • Brand: Bromic Heating
  • Manufacturer Part Number: BH3130097-1
  • Product: Smart-Heat Legacy Link Controller
  • Communication: RS232
  • Application: Home / Building Automation Integration
  • Control Platform: Legacy Bromic Smart-Heat Controls
  • Installation: Professional System Integration
  • Status: Discontinued

What Is the Bromic BH3130097-1 Smart-Heat Link Used For?

The BH3130097-1 was designed to act as a communication bridge between a compatible RS232-equipped home automation system and Bromic's legacy wireless heater controllers.

Rather than directly switching heater power, the Smart-Heat Link receives automation commands and transmits the corresponding wireless commands to compatible Bromic On/Off or Dimmer controllers. This allowed Bromic heaters to become part of a larger integrated control environment.

Legacy RS232 Home Automation Integration

RS232 Communication
Connected to a compatible automation system through an RS232 serial interface.
Wireless Heater Commands
Repeated programmed commands wirelessly to compatible legacy Bromic heater controllers.
Centralized Automation
Allowed heater operation to be incorporated into compatible third-party home automation and building-control environments.
Current Bromic Replacement Path: Affinity Smart-Heat Controls

Bromic has transitioned its current heater-control platform to the Affinity Smart-Heat system. However, there is no verified direct plug-in or one-for-one supersession for BH3130097-1.

Current Bromic Affinity On/Off and Dimmer controllers support modern Wi-Fi and Bluetooth control. For third-party home or building automation, compatible 1-channel and 2-channel Affinity controllers can be paired with the Bromic BH3130070 Affinity Expansion Board, which provides Ethernet connectivity and 0-10V automation inputs.

Because the legacy BH3130097-1 communicates through RS232 while the current Affinity architecture uses different integration methods, upgrading generally requires evaluation of the existing heater controllers, number of heater circuits or zones, heater voltage and wattage, and automation platform.

Important: Affinity Is Not a Drop-In Replacement
Do not order an Affinity controller or expansion board solely as a direct substitute for BH3130097-1. A legacy Smart-Heat Link installation may require replacement or reconfiguration of additional control components. The correct conversion depends on the existing Bromic controllers and the third-party automation system being used.
Specifications
Manufacturer Bromic Heating
Part Number BH3130097-1
Product Type Home Automation Link / Integration Controller
Legacy Communication Interface RS232
Application Bromic Heater / Home Automation Integration
Platform Legacy Smart-Heat Control System
Status Discontinued
Legacy System Compatibility

The BH3130097-1 belongs to Bromic's previous-generation Smart-Heat control architecture and was intended to operate alongside compatible legacy Bromic On/Off and Dimmer controllers.

Before attempting to replace or upgrade an existing Smart-Heat Link installation, identify:

  • Bromic heater model and wattage
  • Quantity of heaters
  • Existing Bromic On/Off or Dimmer controller model numbers
  • Number of independently controlled heating zones
  • System operating voltage
  • Third-party automation system manufacturer and model
  • Required automation interface, including RS232, 0-10V, Ethernet, or another communication method
Current Bromic Affinity Control Options

Bromic's current Affinity Smart-Heat platform provides several controller configurations for modern Platinum and Tungsten heater installations.

BH3130051 Affinity On/Off Controller - 1 Channel
BH3130052 Affinity On/Off Controller - 2 Channel
BH3130053 Affinity On/Off Controller - 5 Channel
BH3130061 Affinity Dimmer Controller - 1 Channel
BH3130062 Affinity Dimmer Controller - 2 Channel
BH3130063 Affinity Dimmer Controller - 5 Channel
BH3130070 Affinity Expansion Board - Ethernet / 0-10V Home Automation Integration

The correct Affinity configuration depends on heater type, electrical load, number of zones, and the automation interface required. The 5-channel Affinity models include expansion-board functionality, while compatible 1-channel and 2-channel systems use BH3130070 as an optional accessory.

Discontinued Product & Replacement Information

BH3130097-1 is a discontinued legacy Bromic control component.

A manufacturer-documented, direct one-for-one supersession has not been identified for this RS232 Smart-Heat Link.

Bromic's current manufacturer-supported control architecture is the Affinity Smart-Heat platform. For Platinum and Tungsten electric heaters, current Affinity Dimmer controllers include BH3130061, BH3130062, and BH3130063. The BH3130070 Expansion Board adds Ethernet and 0-10V home or building automation integration to compatible 1-channel and 2-channel controllers.

Because this represents a control-system migration rather than a simple part swap, existing installations should be evaluated before replacement components are selected.

Installation & Integration Guidance

Bromic automation-control equipment should be configured by a qualified installer, electrician, or professional system integrator familiar with the heater controls and the connected automation platform.

  • Identify all existing heaters and controllers before modifying the system.
  • Document the current RS232 automation programming before removing legacy equipment.
  • Confirm heater voltage and electrical load before selecting a new controller.
  • Determine whether On/Off or variable dimming control is required.
  • Confirm the third-party automation platform supports the desired Affinity integration method.
  • Do not assume legacy RS232 programming will transfer directly to a current 0-10V or Ethernet configuration.
  • Complete all electrical installation in accordance with Bromic instructions and applicable electrical codes.
Frequently Asked Questions
What is Bromic part BH3130097-1? BH3130097-1 is a legacy Bromic Smart-Heat Link used to integrate compatible previous-generation Bromic heater controllers with third-party home automation systems through RS232 communication.
Is Bromic BH3130097-1 discontinued? Yes. BH3130097-1 belongs to Bromic's discontinued legacy control platform and is not part of the current Affinity Smart-Heat controller family.
What replaces the Bromic Smart-Heat Link? Bromic's current control platform is Affinity Smart-Heat. However, there is no verified direct one-for-one replacement for BH3130097-1. A current system may require an Affinity On/Off or Dimmer controller together with the appropriate automation integration hardware.
What is the Bromic BH3130070 Expansion Board? BH3130070 is an Affinity Smart-Heat accessory designed for compatible 1-channel and 2-channel On/Off and Dimmer controllers. It adds Ethernet connectivity and 0-10V connections for home automation or building-management integration.
Does the BH3130070 Expansion Board replace the BH3130097-1 by itself? No. BH3130070 is an accessory for the current Affinity controller platform and is not a standalone replacement for the legacy RS232 Smart-Heat Link.
Can my existing Platinum Smart-Heat electric heaters be retained? Potentially. Current Affinity Dimmer controllers are designed for compatible fixed Platinum and Tungsten electric heaters, but the complete installation must be evaluated based on heater model, voltage, wattage, circuit configuration, and existing controls.
What information is needed to determine the correct replacement? The heater model numbers, quantity of heaters, existing controller model numbers, electrical voltage, wattage, number of heating zones, and make/model of the home automation system should be identified before specifying an Affinity conversion.

Common Part Searches

Bromic BH3130097-1, Bromic BH3130097, Bromic Smart-Heat Link, Bromic Legacy Link Controller, Bromic RS232 controller, Bromic home automation controller, Bromic Platinum Smart-Heat controller, Bromic Smart Heat home integration, Bromic RS232 home automation, Bromic Smart-Heat Link replacement, Bromic Affinity controller upgrade, Bromic BH3130070.

Bromic Affinity Smart-Heat Control Platform
Bromic's current Affinity Smart-Heat controllers provide modern control for compatible Platinum and Tungsten heating systems through Wi-Fi, Bluetooth, and optional Ethernet or 0-10V integration. When upgrading a legacy RS232 installation, the new system should be selected and configured around the existing heaters, electrical requirements, desired zones, and third-party automation platform.
Bromic BH3130097-1 is Discontinued
There is no verified direct drop-in supersession. For a current Bromic solution, evaluate migration to the Affinity Smart-Heat control platform and the BH3130070 Expansion Board where third-party home or building automation integration is required.
View full details