
Vent Free Radiant HeatersInfrared
- Felt almost immediately
- Holds up in a draft
- 10,000 to 30,000 BTU
Best forA garage, a shop, a room that leaks air
Start here
Heatstar make three different answers to that, and they are not interchangeable. Pick the one that matches the space before you worry about size.
Check the gas first. Every heater here is built for either natural gas or propane and the two are not interchangeable. Confirm what runs to the spot before you choose anything else.

Best forA garage, a shop, a room that leaks air

Best forA finished room that is closed up
The first decision
Same brand, same BTU ratings, same wall. What changes is what the heat lands on, and it changes how the room feels more than the size does.
Infrared. Warms objects and people, not the air.
Take this one if the room has a lot in it, or the air moves.
Convection. Heats the air, which then heats the room.
Take this one if the room is open and fairly empty.
Heatstar's own guidance: a room with a lot in it suits radiant, because the heat lands on the objects. An open room suits blue flame, because there is more air to move.
Warms you, not the air
Infrared heat off a ceramic tile burner. You feel it the moment it lights, the way you feel sun through a window, and it keeps working in a room where the air moves.
Warms the whole room
A blue flame tube burner that heats the air and lets it circulate on its own. Slower to come up than radiant, then noticeably more even once it is there.
Size it properly
Give us the three measurements and we will tell you the BTU to start with, and whether the room has enough air to burn vent free in at all. That second one is the part most sites skip.
Out of the way
High intensity radiant mounted ten to twelve feet up, aimed down at the floor and at the people on it. The heat goes where the work is instead of collecting at the ceiling.
Heat where you are
Radiant heat you can carry to the job, from a 22,000 BTU workshop unit up to 125,000 BTU for an open bay. The big one runs off a 100 lb tank and covers serious ground.
Keep it running
The oxygen depletion sensor pilot, the ignitor module, the high limit switch and the blower kit. Genuine Heatstar, so it fits the heater you already own.
Before you buy
Vent free heaters put their combustion air and their exhaust into the room they heat. That is why they waste nothing, and it is also why the room has rules. Heatstar do not sell these into California or Canada, and some local codes go further, so check with your building department before you order.
Every one of these ships with an Oxygen Depletion Sensor on the pilot. If the fresh air in the room runs low, the sensor shuts the heater off. It is not an option you add, it is factory standard.
Heatstar count a space as unconfined when it holds at least fifty cubic feet of air for every 1,000 BTU. Under that the manual asks for extra combustion air. The sizer above does this sum for you.
Above about 4,500 feet the thinner air can trip the pilot and the oxygen sensor and shut the heater down. Worth knowing before you ship one up a mountain.
Tell us the length, width and ceiling height, whether you have natural gas or propane at the spot, and what the room is used for. That is enough for us to tell you the heater, the BTU and whether the space needs any extra ventilation first.