{"title":"Osburn Fresh Air And Liner Adapters","description":null,"products":[{"product_id":"osburn-ac01211-fresh-air-intake-kit-legs-2000","title":"Osburn 5\" Fresh Air Intake Kit for 2000 Wood Stove on Legs | AC01211","description":"\u003cp\u003e\u003cb\u003eThe Osburn AC01211 is a 5\" fresh air intake kit for the 2000 wood stove on legs.\u003c\/b\u003e It brings combustion air from outside straight to the stove, through a housing mounted under the firebox and a wall grille. Osburn's instructions cover the 2000 (OB02015) from serial 5789, and the kit is also listed for the Gusto cookstove.\u003c\/p\u003e\n\u003ch2\u003eAt a glance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\" intake\u003c\/strong\u003e: Outside air to the stove\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6\" x 6\"\u003c\/strong\u003e: Wall opening for the grille\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMobile home\u003c\/strong\u003e: Leg retainers included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2000 on legs\u003c\/strong\u003e: Serial 5789 and up\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDetails\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eAC01211\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eOsburn 2000 wood stove on legs (OB02015, serial 5789 and later); listed for the Gusto cookstove (OB02047)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003e5\" air intake housing, 2 clamps, 48\" self-adhesive gasket, 5\" wall grille, 4 screws #10 x 5\/8\", 4 mobile home leg retainers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAlso needed\u003c\/th\u003e\n\u003ctd\u003eInsulated HVAC flexible duct, 5\" diameter, ULC S110 or UL 181 class 0 or class 1 (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAlso needed\u003c\/th\u003e\n\u003ctd\u003e4 screws for the grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall opening\u003c\/th\u003e\n\u003ctd\u003e6\" x 6\" (150 mm x 150 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOsburn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eThe termination goes outside.\u003c\/strong\u003e The grille must be installed on the outside of the building, and the intake and duct should be checked now and then for blockage.\u003c\/p\u003e\n\u003ch2\u003eQuestions people ask us\u003c\/h2\u003e\u003ch3\u003eWhat else do I need?\u003c\/h3\u003e\u003cp\u003eA 5\" insulated HVAC flexible duct rated ULC S110 or UL 181 class 0 or 1, such as Osburn's \u003cb\u003eAC02090\u003c\/b\u003e 4 ft pipe, plus four screws for the grille.\u003c\/p\u003e\u003ch3\u003eHow does it install?\u003c\/h3\u003e\u003cp\u003eRemove the air control cover and ash drawer, apply the gasket to the housing, fasten the housing under the stove with two screws at the back and two at the front, refit the drawer and cover, cut a 6\" x 6\" hole in the outside wall, and connect the duct between the housing and the grille.\u003c\/p\u003e\u003ch3\u003eWhat about mobile homes?\u003c\/h3\u003e\u003cp\u003eThe kit includes four leg retainers. In a mobile home, use them with suitable flooring hardware to anchor the stove to the floor.\u003c\/p\u003e\u003ch3\u003eWill it fit my stove?\u003c\/h3\u003e\u003cp\u003eOsburn's instructions name the 2000 from \u003cb\u003eserial 5789\u003c\/b\u003e. Send us your serial number through our \u003ca href=\"\/pages\/contact-us\"\u003econtact page\u003c\/a\u003e and we will confirm.\u003c\/p\u003e","brand":"Osburn","offers":[{"title":"Default Title","offer_id":67630695776530,"sku":"AC01211","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/osburn-ac01211-fresh-air-intake-kit-legs-2000.jpg?v=1792563840"},{"product_id":"osburn-ac01214-offset-liner-adapter","title":"Osburn Offset Liner Adapter for Osburn Wood Inserts | AC01214","description":"\u003cp\u003e\u003cb\u003eThe Osburn AC01214 offset liner adapter connects a stainless steel chimney liner to an Osburn wood insert when the chimney flue does not line up with the insert's flue collar.\u003c\/b\u003e It builds the offset into the connection and has a cleanout cover for sweeping. Osburn lists it for its 2000-I, 1700-I, 3500-I, Inspire 2000-I and Matrix inserts.\u003c\/p\u003e\n\u003ch2\u003eAt a glance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffset\u003c\/strong\u003e: Flue not centered on the collar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 screws\u003c\/strong\u003e: Self-tapping, to the insert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleanout\u003c\/strong\u003e: Removable cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7 inserts\u003c\/strong\u003e: Osburn wood inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDetails\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eAC01214\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eOsburn 2000-I (OB02016), 1700-I (OB01705), 3500-I (OB03510), Inspire 2000-I (OB02045), Matrix (OB02028), Matrix 1900 (OB01900), Matrix 2700 (OB02700)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eConnects a chimney liner to the insert with an offset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLiner\u003c\/th\u003e\n\u003ctd\u003eFlexible or rigid stainless steel (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAlso needed\u003c\/th\u003e\n\u003ctd\u003eFlexible liner adapter from the liner maker (flexible liners), 3 self-tapping screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChimney height\u003c\/th\u003e\n\u003ctd\u003eAt least 15 ft once installed (adapter instructions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOsburn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eUse it only when you must.\u003c\/strong\u003e Osburn says not to add any other offset with this adapter, and the 2000-I manual treats an offset as a last resort that needs at least 20 ft of total fireplace and chimney height. Follow your insert manual.\u003c\/p\u003e\n\u003ch2\u003eQuestions people ask us\u003c\/h2\u003e\u003ch3\u003eWhen do I need an offset adapter?\u003c\/h3\u003e\u003cp\u003eWhen the chimney flue sits off to one side of the insert's flue collar, so a straight liner connection is not possible. Where a straight connection works, Osburn's manuals prefer it.\u003c\/p\u003e\u003ch3\u003eCan I use a firescreen with it?\u003c\/h3\u003e\u003cp\u003eNo. Osburn's instructions strongly discourage a firescreen when an offset is installed, because the restriction raises the risk of smoke leaking from the door.\u003c\/p\u003e\u003ch3\u003eHow is it cleaned?\u003c\/h3\u003e\u003cp\u003eAfter sweeping the chimney, remove the front decorative pieces, unscrew the cover on the adapter, clean inside, then refit the cover and the trim.\u003c\/p\u003e\u003ch3\u003eWill it work in my chimney?\u003c\/h3\u003e\u003cp\u003eSend us your insert model, chimney height and how far the flue is offset through our \u003ca href=\"\/pages\/contact-us\"\u003econtact page\u003c\/a\u003e and we will check it with you.\u003c\/p\u003e","brand":"Osburn","offers":[{"title":"Default Title","offer_id":67630695809298,"sku":"AC01214","price":295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/osburn-ac01214-offset-liner-adapter.jpg?v=1792563840"},{"product_id":"osburn-ac01291-fresh-air-intake-kit-legs-1700","title":"Osburn 5\" Fresh Air Intake Kit for 1700 Wood Stove on Legs | AC01291","description":"\u003cp\u003e\u003cb\u003eThe Osburn AC01291 is the 5\" fresh air intake kit for the 1700 wood stove on legs.\u003c\/b\u003e It feeds outside combustion air to the stove through a housing under the firebox and a grille on the outside wall. The 1700 manual requires a fresh air intake kit when the stove goes into a mobile home.\u003c\/p\u003e\n\u003ch2\u003eAt a glance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\" intake\u003c\/strong\u003e: Outside air to the stove\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6\" x 6\"\u003c\/strong\u003e: Wall opening for the grille\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMobile home\u003c\/strong\u003e: Brackets included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1700 on legs\u003c\/strong\u003e: Wood stove OB01700\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDetails\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eAC01291\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eOsburn 1700 wood stove on legs (OB01700)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003e5\" air intake housing, 36\" self-adhesive gasket, 4 screws #10 x 5\/8\", 2 clamps, 5\" wall grille, 4 mobile home brackets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAlso needed\u003c\/th\u003e\n\u003ctd\u003eInsulated HVAC flexible duct, 5\" diameter, ULC S110 or UL 181 class 0 or class 1 (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAlso needed\u003c\/th\u003e\n\u003ctd\u003e4 screws for the grille\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall opening\u003c\/th\u003e\n\u003ctd\u003e6\" x 6\" (150 mm x 150 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOsburn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eThe termination goes outside.\u003c\/strong\u003e The grille must be installed outside the building. Inspect the intake and duct from time to time so nothing blocks it.\u003c\/p\u003e\n\u003ch2\u003eQuestions people ask us\u003c\/h2\u003e\u003ch3\u003eDo I need it?\u003c\/h3\u003e\u003cp\u003eIt is optional in most homes. The 1700 manual says a mobile home installation \u003cb\u003erequires\u003c\/b\u003e a fresh air intake kit and insulated pipe.\u003c\/p\u003e\u003ch3\u003eWhat else do I need?\u003c\/h3\u003e\u003cp\u003eA 5\" insulated HVAC flexible duct rated ULC S110 or UL 181 class 0 or 1, such as the \u003cb\u003eAC02090\u003c\/b\u003e, and four screws for the grille.\u003c\/p\u003e\u003ch3\u003eMy 1700 is on a pedestal. Which kit?\u003c\/h3\u003e\u003cp\u003eUse the \u003cb\u003eAC01336\u003c\/b\u003e kit for stoves on pedestal.\u003c\/p\u003e\u003ch3\u003eWill it fit my stove?\u003c\/h3\u003e\u003cp\u003eSend us your Osburn model and serial number through our \u003ca href=\"\/pages\/contact-us\"\u003econtact page\u003c\/a\u003e and we will confirm the part before you order.\u003c\/p\u003e","brand":"Osburn","offers":[{"title":"Default Title","offer_id":67630700396818,"sku":"AC01291","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/osburn-ac01291-fresh-air-intake-kit-legs-1700.jpg?v=1792563927"},{"product_id":"osburn-ac01298-fresh-air-intake-kit-inserts","title":"Osburn 5\" Fresh Air Intake Kit for Osburn Wood Inserts | AC01298","description":"\u003cp\u003e\u003cb\u003eThe Osburn AC01298 is a 5\" fresh air intake kit that brings outside combustion air to an Osburn wood insert.\u003c\/b\u003e An adapter fastens to the left or right end of the insert and connects to an insulated duct that runs to an outside wall termination. Osburn lists it for its 2000-I, 1700-I, 3500-I, Inspire 2000-I, Matrix, Matrix 1900 and Matrix 2700 inserts.\u003c\/p\u003e\n\u003ch2\u003eAt a glance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\" intake\u003c\/strong\u003e: Outside air to the insert\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeft or right\u003c\/strong\u003e: Mounts on either end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e+4\" opening\u003c\/strong\u003e: Add to the minimum width\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7 inserts\u003c\/strong\u003e: Osburn wood inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDetails\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eAC01298\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eOsburn 2000-I (OB02016), 1700-I (OB01705), 3500-I (OB03510), Inspire 2000-I (OB02045), Matrix (OB02028), Matrix 1900 (OB01900), Matrix 2700 (OB02700)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eAdapter on the left or right end of the insert, 4 screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAlso needed\u003c\/th\u003e\n\u003ctd\u003eInsulated HVAC flexible duct, 5\" diameter, ULC S110 or UL 181 class 0 or class 1 (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFireplace opening\u003c\/th\u003e\n\u003ctd\u003eAdd at least 4\" to the minimum opening width (2000-I and 3500-I manuals)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOsburn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003ePlan the opening width.\u003c\/strong\u003e The 2000-I and 3500-I manuals ask for at least 4\" more than the minimum fireplace opening width when a fresh air intake is used.\u003c\/p\u003e\n\u003ch2\u003eQuestions people ask us\u003c\/h2\u003e\u003ch3\u003eHow does it install?\u003c\/h3\u003e\u003cp\u003eThe 3500-I manual has you remove the small plate on the end of the insert, fasten the intake adapter with four screws, and clamp on an insulated flexible duct that runs to a termination on the outside wall.\u003c\/p\u003e\u003ch3\u003eWhat else do I need?\u003c\/h3\u003e\u003cp\u003eA 5\" insulated HVAC duct rated ULC S110 and\/or UL 181, class 0 or 1, such as the \u003cb\u003eAC02090\u003c\/b\u003e, and an outside wall termination.\u003c\/p\u003e\u003ch3\u003eDo I need to check it?\u003c\/h3\u003e\u003cp\u003eYes. The 2000-I manual notes outdoor air ducts can be affected by wind and should be checked for soot at least once a year.\u003c\/p\u003e\u003ch3\u003eWill it fit my insert?\u003c\/h3\u003e\u003cp\u003eSend us your Osburn model and serial number through our \u003ca href=\"\/pages\/contact-us\"\u003econtact page\u003c\/a\u003e and we will confirm the part before you order.\u003c\/p\u003e","brand":"Osburn","offers":[{"title":"Default Title","offer_id":67630700429586,"sku":"AC01298","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/osburn-ac01298-fresh-air-intake-kit-inserts.jpg?v=1792563927"},{"product_id":"osburn-ac01336-fresh-air-intake-kit-pedestal","title":"Osburn 5\" Fresh Air Intake Kit for Wood Stove on Pedestal, 2000, 1700, 3500 | AC01336","description":"\u003cp\u003e\u003cb\u003eThe Osburn AC01336 is the 5\" fresh air intake kit for Osburn wood stoves on a pedestal: the 2000, 1700 and 3500.\u003c\/b\u003e It connects outside air to the pedestal, either through the wall behind the stove or through the floor underneath. The kit has the adapter, clamps and screws; the insulated pipe is separate.\u003c\/p\u003e\n\u003ch2\u003eAt a glance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\" intake\u003c\/strong\u003e: Outside air to the stove\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall or floor\u003c\/strong\u003e: Two install routes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 ft max\u003c\/strong\u003e: Remote intake distance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 stoves\u003c\/strong\u003e: 2000, 1700, 3500\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDetails\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eAC01336\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eOsburn 2000 (OB02015), 1700 (OB01700) and 3500 (OB03500) wood stoves on pedestal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003e5\" adapter, 2 pipe clamps (4.93\" to 5.75\"), screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAlso needed\u003c\/th\u003e\n\u003ctd\u003e5\" insulated flexible pipe such as AC02090, outside intake cap and its screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall route\u003c\/th\u003e\n\u003ctd\u003e6\" x 6\" opening in the outside wall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFloor route\u003c\/th\u003e\n\u003ctd\u003e5 1\/2\" x 5 1\/2\" opening under the stove\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRemote intake\u003c\/th\u003e\n\u003ctd\u003eAir intake no more than 5 ft (1.52 m) from the pedestal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOsburn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSeal the base.\u003c\/strong\u003e Osburn asks you to seal any gaps between the pedestal base and the floor with extra insulation, especially where the pedestal flanges are open.\u003c\/p\u003e\n\u003ch2\u003eQuestions people ask us\u003c\/h2\u003e\u003ch3\u003eWall or floor?\u003c\/h3\u003e\u003cp\u003eEither. Through the wall, you remove the knockout plate on the back of the pedestal and run the pipe out a 6\" x 6\" opening. Through the floor, you cut a 5 1\/2\" x 5 1\/2\" opening under the stove and attach the adapter to the floor.\u003c\/p\u003e\u003ch3\u003eHow do I know it is blocked?\u003c\/h3\u003e\u003cp\u003eOsburn says a sign of an obstructed intake is the kindling smothering when you burn with the door closed. Check the outside intake from time to time.\u003c\/p\u003e\u003ch3\u003eMy stove is on legs. Which kit?\u003c\/h3\u003e\u003cp\u003eLegs use a different kit: \u003cb\u003eAC01211\u003c\/b\u003e for the 2000 and \u003cb\u003eAC01291\u003c\/b\u003e for the 1700.\u003c\/p\u003e\u003ch3\u003eWill it fit my stove?\u003c\/h3\u003e\u003cp\u003eSend us your Osburn model and serial number through our \u003ca href=\"\/pages\/contact-us\"\u003econtact page\u003c\/a\u003e and we will confirm the part before you order.\u003c\/p\u003e","brand":"Osburn","offers":[{"title":"Default Title","offer_id":67630709047570,"sku":"AC01336","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/osburn-ac01336-fresh-air-intake-kit-pedestal.jpg?v=1792564101"},{"product_id":"osburn-ac01421-fresh-air-intake-kit-950","title":"Osburn 5\" Fresh Air Intake Kit for 950 Wood Stove | AC01421","description":"\u003cp\u003e\u003cb\u003eThe Osburn AC01421 is the 5\" fresh air intake kit for the 950 wood stove.\u003c\/b\u003e A housing fastens under the stove and connects through an insulated duct to a grille on the outside wall, so the fire burns outside air instead of room air. It is listed on the 950 product page and as item 41 in its parts list.\u003c\/p\u003e\n\u003ch2\u003eAt a glance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\" intake\u003c\/strong\u003e: Outside air to the stove\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6\" x 6\"\u003c\/strong\u003e: Wall opening for the grille\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 air covers\u003c\/strong\u003e: Round or flat hatch rod\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e950\u003c\/strong\u003e: Wood stove OB00950\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDetails\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eAC01421\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eOsburn 950 wood stove (OB00950)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003e5\" air intake housing, 2 gasket strips, 2 air control covers (round and flat hatch rod), 5\" wall grille, 4 screws #10 x 5\/8\", 2 clamps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAlso needed\u003c\/th\u003e\n\u003ctd\u003eInsulated HVAC flexible duct, 5\" diameter, ULC S110 or UL 181 class 0 or class 1 (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAlso needed\u003c\/th\u003e\n\u003ctd\u003e4 grille screws; mobile home anchoring screws if needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWall opening\u003c\/th\u003e\n\u003ctd\u003e6\" x 6\" (150 mm x 150 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOsburn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eThe termination goes outside.\u003c\/strong\u003e The grille must be on the outside of the building. Check the intake and duct regularly so nothing blocks the air.\u003c\/p\u003e\n\u003ch2\u003eQuestions people ask us\u003c\/h2\u003e\u003ch3\u003eWhy are there two air control covers?\u003c\/h3\u003e\u003cp\u003eThe kit includes covers for a round and a flat hatch rod. Use the one that matches the air control rod on your stove.\u003c\/p\u003e\u003ch3\u003eHow does it install?\u003c\/h3\u003e\u003cp\u003eCut and apply the two gasket strips, fasten the housing under the stove with two screws at the back and two at the front, fold and fit the matching air control cover, then cut a 6\" x 6\" wall opening and connect the duct to the housing and grille with the clamps.\u003c\/p\u003e\u003ch3\u003eWhat duct do I need?\u003c\/h3\u003e\u003cp\u003eA 5\" insulated HVAC flexible duct rated ULC S110 or UL 181, class 0 or 1, such as the \u003cb\u003eAC02090\u003c\/b\u003e.\u003c\/p\u003e\u003ch3\u003eWill it fit my stove?\u003c\/h3\u003e\u003cp\u003eSend us your Osburn model and serial number through our \u003ca href=\"\/pages\/contact-us\"\u003econtact page\u003c\/a\u003e and we will confirm the part before you order.\u003c\/p\u003e","brand":"Osburn","offers":[{"title":"Default Title","offer_id":67630712619282,"sku":"AC01421","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/osburn-ac01421-fresh-air-intake-kit-950.jpg?v=1792564185"},{"product_id":"osburn-ac02006-liner-hook-up-system","title":"Osburn Liner Hook Up System for Osburn Wood Inserts | AC02006","description":"\u003cp\u003e\u003cb\u003eThe Osburn AC02006 liner hook up system lets you attach a stainless steel flexible liner to an Osburn wood insert's flue collar from inside the firebox.\u003c\/b\u003e You fix the adapter to the liner, slide the insert into place, then pull the adapter down onto the collar and lock it with a handle and nut. Osburn lists it for its 2000-I, 1700-I, 3500-I, Inspire 2000-I and Matrix inserts.\u003c\/p\u003e\n\u003ch2\u003eAt a glance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrom inside\u003c\/strong\u003e: Connect through the firebox\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock nut\u003c\/strong\u003e: Stainless steel 1\/2-13\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 screws\u003c\/strong\u003e: Adapter to liner adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7 inserts\u003c\/strong\u003e: Osburn wood inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDetails\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eAC02006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003ctd\u003eOsburn 2000-I (OB02016), 1700-I (OB01705), 3500-I (OB03510), Inspire 2000-I (OB02045), Matrix (OB02028), Matrix 1900 (OB01900), Matrix 2700 (OB02700)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eFlue outlet adapter, 3 self-drilling screws #8 x 3\/4\", removable tightening handle, 4 washers, stainless steel 1\/2-13 nut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAlso needed\u003c\/th\u003e\n\u003ctd\u003eStainless steel flexible liner and the liner maker's liner adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTools\u003c\/th\u003e\n\u003ctd\u003ePower driver with Robertson bit, 3\/4\" wrench\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOsburn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eDo not overtighten.\u003c\/strong\u003e Osburn warns that overtightening the nut damages the adapter. Tighten only until the handle rests firmly under the insert top.\u003c\/p\u003e\n\u003ch2\u003eQuestions people ask us\u003c\/h2\u003e\u003ch3\u003eWhy use it?\u003c\/h3\u003e\u003cp\u003eIt lets you make the liner connection after the insert is in the fireplace, working from inside the firebox, instead of connecting blind behind the insert.\u003c\/p\u003e\u003ch3\u003eHow does it install?\u003c\/h3\u003e\u003cp\u003eScrew the flue outlet adapter to the liner adapter, drop the liner down the chimney and set the insert. Remove the upper firebox parts, pull the adapter down into the flue collar, refit the handle, washers and nut, and tighten with a 3\/4\" wrench. Put the baffle parts back.\u003c\/p\u003e\u003ch3\u003eIs the liner included?\u003c\/h3\u003e\u003cp\u003eNo. You need a stainless steel flexible liner and its adapter from the liner maker.\u003c\/p\u003e\u003ch3\u003eWill it fit my insert?\u003c\/h3\u003e\u003cp\u003eSend us your Osburn model and serial number through our \u003ca href=\"\/pages\/contact-us\"\u003econtact page\u003c\/a\u003e and we will confirm the part before you order.\u003c\/p\u003e","brand":"Osburn","offers":[{"title":"Default Title","offer_id":67630712652050,"sku":"AC02006","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/osburn-ac02006-liner-hook-up-system.jpg?v=1792564186"},{"product_id":"osburn-ac02090-insulated-flex-pipe-5-x-4","title":"Osburn 5\" x 4' Insulated Flex Pipe for Fresh Air Intake | AC02090","description":"\u003cp\u003e\u003cb\u003eThe Osburn AC02090 is a 5\" diameter, 4 ft insulated flex pipe for carrying outside air to an Osburn fresh air intake kit.\u003c\/b\u003e Osburn describes it as reinforced aluminized trilaminate with fiberglass insulation. It is listed as the matching pipe on Osburn's wood stove and insert pages.\u003c\/p\u003e\n\u003ch2\u003eAt a glance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\" x 4 ft\u003c\/strong\u003e: Diameter and length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulated\u003c\/strong\u003e: Fiberglass insulation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrilaminate\u003c\/strong\u003e: Reinforced aluminized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStoves and inserts\u003c\/strong\u003e: Osburn fresh air kits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDetails\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eAC02090\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e5\" (127 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e4 ft (1.2 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eReinforced aluminized trilaminate with fiberglass insulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUsed with\u003c\/th\u003e\n\u003ctd\u003eOsburn 5\" fresh air intake kits such as AC01298, AC01211, AC01291, AC01336 and AC01421\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eListed for\u003c\/th\u003e\n\u003ctd\u003eOsburn 2000, 1700, 3500, 950, Inspire 2000, Matrix and Gusto stoves; 2000-I, 1700-I, 3500-I, Inspire 2000-I, Matrix, Matrix 1900 and Matrix 2700 inserts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOsburn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eKeep the run short and clear.\u003c\/strong\u003e Do not crush or kink the pipe. Fresh air kit instructions ask for the intake and duct to be checked so nothing blocks the air.\u003c\/p\u003e\n\u003ch2\u003eQuestions people ask us\u003c\/h2\u003e\u003ch3\u003eIs 4 ft enough?\u003c\/h3\u003e\u003cp\u003eFor a stove close to an outside wall, often yes. For longer runs, Osburn also makes 5\" pipe in 10 ft (AC02093) and 25 ft (AC02094). Ask us if you need one.\u003c\/p\u003e\u003ch3\u003eDoes it meet the kit requirements?\u003c\/h3\u003e\u003cp\u003eOsburn's fresh air kit instructions call for insulated HVAC flexible duct to ULC S110 or UL 181 class 0 or 1, and Osburn pairs this pipe with its kits. The AC01336 instructions name the AC02090 directly.\u003c\/p\u003e\u003ch3\u003eDo I need clamps?\u003c\/h3\u003e\u003cp\u003eOsburn fresh air kits include the pipe clamps. Check your kit's contents.\u003c\/p\u003e\u003ch3\u003eWill it suit my setup?\u003c\/h3\u003e\u003cp\u003eSend us your Osburn model and serial number through our \u003ca href=\"\/pages\/contact-us\"\u003econtact page\u003c\/a\u003e and we will confirm the part before you order.\u003c\/p\u003e","brand":"Osburn","offers":[{"title":"Default Title","offer_id":67630717141266,"sku":"AC02090","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/osburn-ac02090-insulated-flex-pipe-5-x-4.jpg?v=1792564279"}],"url":"https:\/\/www.aquaterrabackyard.com\/collections\/osburn-chimney-venting-systems.oembed","provider":"Aqua Terra Backyard","version":"1.0","type":"link"}