{"title":"Diving Boards","description":"\u003ch2\u003e\u003cstrong\u003eDiving Boards, Complete Diving Systems, Stands, Springs, and Replacement Hardware\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cp\u003eUpgrade, repair, or replace your in-ground pool diving setup with diving boards and diving board hardware from Aqua Terra Backyard. This collection includes complete diving board systems, replacement diving boards, jump stands, U-frames, diving board springs, bases, jigs, and stainless steel hardware for compatible residential pool installations. Whether you are replacing an older board, matching an existing stand, or building out a complete diving system, the right parts help keep the setup secure, properly supported, and ready for safe pool use.\u003c\/p\u003e\n\n\u003cp\u003eShop diving boards and diving system components from \u003ca href=\"\/collections\/sr-smith\"\u003eS.R. Smith\u003c\/a\u003e, one of the most recognized brands in pool diving equipment. This collection includes S.R. Smith options such as Flyte-Deck II diving boards, T7 complete diving systems, salt pool jump stands, U-frame supports, springs, and related hardware in common finishes and sizes. You can also browse related categories like \u003ca href=\"\/collections\/pool-deck-hardware\"\u003ePool Deck Hardware\u003c\/a\u003e, \u003ca href=\"\/collections\/deck-diving-board-ladder-slide-hardware\"\u003eDeck: Diving Board, Ladder \u0026amp; Slide Hardware\u003c\/a\u003e, \u003ca href=\"\/collections\/ladders-steps\"\u003eLadders \u0026amp; Steps\u003c\/a\u003e, \u003ca href=\"\/collections\/pool-signs-safety\"\u003eSigns \u0026amp; Safety\u003c\/a\u003e, \u003ca href=\"\/collections\/pool-equipment\"\u003ePool Equipment\u003c\/a\u003e, \u003ca href=\"\/collections\/pool-spa-parts\"\u003ePool \u0026amp; Spa Parts\u003c\/a\u003e, and \u003ca href=\"\/collections\/pool-spa-maintenance\"\u003ePool \u0026amp; Spa Maintenance\u003c\/a\u003e if you are updating more of the pool deck area.\u003c\/p\u003e\n\n\u003cp\u003eDiving boards and diving board parts must be matched carefully. Board length, stand type, jig pattern, spring compatibility, pool depth, pool shape, overhang, installation clearances, and local safety requirements all matter. A replacement board or stand may look close and still be wrong for the pool or existing hardware. Before ordering, compare the existing board model, stand model, bolt pattern, board length, pool depth, and any S.R. Smith part numbers or markings. If you are unsure which diving board, stand, spring, U-frame, or complete diving system fits your pool, \u003ca href=\"\/pages\/contact\"\u003econtact Aqua Terra Backyard\u003c\/a\u003e with photos of your current setup, measurements, and any labels or part numbers. We can help you narrow down the right option before you buy.\u003c\/p\u003e","products":[{"product_id":"sr-smith-69-209-5866-frontier-ii-spring-base-6-ft-board-compatible-white-finish","title":"SR Smith 69-209-5866 Frontier II Spring Base – 6 ft Board Compatible, White Finish","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This is a Frontier II spring base used as a structural support component for an SR Smith diving board spring assembly. It sits in the diving stand system where it supports the spring hardware that controls board response. It is listed as compatible with 6 ft boards and includes a white finish for matching existing equipment. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e A damaged or misaligned spring base can cause movement, noise, and uneven board response that wears out other components faster. Matching the correct board length compatibility helps keep the system geometry correct. Using the wrong base can create fitment issues and can lead to instability over time. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 69-209-5866\u003c\/li\u003e \u003cli\u003eFrontier II spring base\u003c\/li\u003e \u003cli\u003e6 ft board compatible as listed\u003c\/li\u003e \u003cli\u003eWhite finish\u003c\/li\u003e \u003cli\u003eStructural support component for spring hardware in diving systems\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Install per SR Smith Frontier II assembly instructions for the specific diving stand configuration. Inspect surrounding hardware for corrosion or elongation at mounting points before reassembly. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith diving hardware is widely used in aquatic facilities that need consistent installation standards and long-term serviceability. Their Frontier series parts are designed to be replaced as assemblies age. Accurate SR Smith part matching helps keep the diving system aligned and safe. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e Commonly replaced during spring assembly rebuilds, board upgrades, or after corrosion and deck movement affect the stand hardware. Technicians typically identify the base by the Frontier II designation and the 6 ft compatibility requirement. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014347813138,"sku":"69-209-5866","price":460.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR692095866_0.jpg?v=1770697057"},{"product_id":"sr-smith-69-209-610-salt-pool-jump-stand-taupe-finish","title":"SR Smith 69-209-610 Salt Pool Jump Stand – Taupe Finish","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This is an SR Smith Salt Pool jump stand used as a deck-mounted support for a compatible jump board setup. It provides the structural stand component that holds the board system in the correct position at the pool edge. The taupe finish is specified to match the look of a particular installation. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e A jump stand has to stay rigid to avoid movement that can loosen anchors, stress the deck, and change how the board feels under use. Using the correct stand helps keep the board aligned and consistent over time. Substituting the wrong stand can create fitment issues and an unstable setup. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 69-209-610\u003c\/li\u003e \u003cli\u003eSalt Pool jump stand\u003c\/li\u003e \u003cli\u003eTaupe finish\u003c\/li\u003e \u003cli\u003eDeck-mounted support component for jump board installations\u003c\/li\u003e \u003cli\u003eSR Smith jump system replacement part\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Install per SR Smith jump stand specifications for anchor placement and alignment at the deck edge. Verify the stand matches the existing Salt Pool jump system configuration. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith builds commercial-grade pool deck and diving related equipment designed for repeatable installation and long-term maintenance. Their Salt Pool line supports facilities that need durable, serviceable components in harsh environments. Matching SR Smith part numbers helps avoid costly fitment mistakes. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e Often encountered during deck renovations, facility refresh projects, or when a jump stand shows corrosion or movement. Technicians usually confirm the correct replacement by finish, system series, and the SR Smith part number. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014347845906,"sku":"69-209-610","price":653.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR69209610_0.jpg?v=1770697058"},{"product_id":"sr-smith-69-209-62-salt-pool-jump-stand-radiant-white-finish","title":"SR Smith 69-209-62 Salt Pool Jump Stand – Radiant White Finish","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This is an SR Smith Salt Pool jump stand used as the deck-mounted support structure for a compatible jump board system. It is installed at the pool edge to hold the stand geometry and board position. The radiant white finish is listed for matching existing Salt Pool installations. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e If the stand is loose or compromised, the board can feel unstable and the deck anchoring can start to fail over time. Using the correct stand keeps alignment consistent and helps prevent accelerated wear at the mounting points. Swapping in a non-matching stand can create fitment issues and an unsafe setup. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 69-209-62\u003c\/li\u003e \u003cli\u003eSalt Pool jump stand\u003c\/li\u003e \u003cli\u003eRadiant white finish\u003c\/li\u003e \u003cli\u003eDeck-mounted support component for jump board installations\u003c\/li\u003e \u003cli\u003eSR Smith jump system replacement part\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Install according to SR Smith specifications for anchor placement, alignment, and deck requirements. Verify the existing jump system configuration matches this stand before ordering. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith supports aquatic facilities with standardized equipment that can be maintained and rebuilt over time. Their jump stands and diving related components are designed around spec-driven configurations for consistency and safety. Pros rely on SR Smith part numbers to keep replacements accurate. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e Commonly replaced during seasonal maintenance, deck resurfacing, or when corrosion causes movement at the base. Technicians typically identify the correct unit by the Salt Pool series and the listed finish color. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014347878674,"sku":"69-209-62","price":584.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR6920962_0.jpg?v=1770697061"},{"product_id":"sr-smith-uf-18-101-u-frame-18-in-height-049-wall-thickness","title":"SR Smith UF-18-101 U-Frame – 18 in Height, .049 Wall Thickness","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This U-Frame is a structural support component used beneath compatible SR Smith diving board assemblies. It provides the fixed-height base that supports the board mounting hardware at an 18 inch elevation. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e The U-Frame controls board height and stability, which directly affects safe board performance. A bent, corroded, or mismatched frame can cause flex issues or improper board alignment. Replacing the frame restores proper support and maintains compliance with the original installation setup. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number UF-18-101\u003c\/li\u003e \u003cli\u003eU-Frame support component\u003c\/li\u003e \u003cli\u003e18 inch frame height\u003c\/li\u003e \u003cli\u003e.049 wall thickness\u003c\/li\u003e \u003cli\u003eUsed in SR Smith diving board assemblies\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e This frame must match the original diving board system height and configuration. Installation is typically performed during board replacement or structural service. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith is a long-established manufacturer of commercial and residential pool access and diving equipment. Their products are built around standardized systems that prioritize serviceability and code-aligned installation. Replacement parts are designed to integrate cleanly into existing SR Smith assemblies. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e Technicians encounter this frame when replacing aging diving boards or correcting structural corrosion beneath the stand. It is often identified during inspections where board height or support integrity no longer meets original specs. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014348140818,"sku":"UF-18-101","price":216.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSRUF18101_0.jpg?v=1770697077"},{"product_id":"sr-smith-uf-24-102-u-frame-24-in-height-065-wall-thickness","title":"SR Smith UF-24-102 U-Frame – 24 in Height, .065 Wall Thickness","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This U-Frame provides the fixed-height structural base for SR Smith diving board installations requiring a 24 inch elevation. It supports the board mounting assembly and maintains proper board positioning. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Board height and frame integrity directly affect diving board performance and safety. A weakened or incorrect frame can cause excessive flex or alignment issues. Replacing the U-Frame restores proper system geometry and load support. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number UF-24-102\u003c\/li\u003e \u003cli\u003eU-Frame support component\u003c\/li\u003e \u003cli\u003e24 inch frame height\u003c\/li\u003e \u003cli\u003e.065 wall thickness\u003c\/li\u003e \u003cli\u003eUsed in SR Smith diving board systems\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e This frame must match the original diving board height and stand configuration. Installation is typically completed during board or structural replacement. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith designs pool equipment with consistent system compatibility across product lines. Their diving systems are engineered to meet industry standards while remaining service-friendly. Replacement components are built to integrate without modification. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e Technicians encounter this frame when correcting improper board height or replacing corroded supports. It is often identified during safety inspections or board retrofits. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014348206354,"sku":"UF-24-102","price":348.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSRUF24102_0.jpg?v=1770697082"},{"product_id":"sr-smith-66-209-208s2-1-glas-hide-diving-board-8-ft-length-radiant-white","title":"SR Smith 66-209-208S2-1 Glas-Hide Diving Board – 8 ft Length, Radiant White","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Glas-Hide diving board is used on compatible SR Smith residential pool diving systems. It mounts to an approved stand and provides a stable diving surface for recreational use. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e A worn or damaged diving board can lose grip, flex improperly, or fail under load. Replacing the board restores safe surface traction and predictable board response. Using the correct length and model ensures compatibility with the existing stand. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 66-209-208S2-1\u003c\/li\u003e \u003cli\u003eGlas-Hide diving board\u003c\/li\u003e \u003cli\u003e8 ft board length\u003c\/li\u003e \u003cli\u003eRadiant White finish\u003c\/li\u003e \u003cli\u003eDesigned for SR Smith diving board systems\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Board length and model must match the existing stand and pool configuration. Installation is typically performed during board replacement due to wear or surface damage. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith is known for dependable pool diving and access equipment used across residential and commercial pools. Their diving boards are engineered to integrate with standardized stand systems. Long-term serviceability is a core focus of their product design. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is commonly replaced when surface wear, discoloration, or loss of traction is observed. Technicians often identify the need during seasonal openings or safety inspections. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014348239122,"sku":"66-209-208S2-1","price":956.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR66209208S21_0.jpg?v=1770697083"},{"product_id":"sr-smith-66-209-266s10t-fibre-dive-diving-board-6-ft-length-taupe-with-tan-tread","title":"SR Smith 66-209-266S10T Fibre-Dive Diving Board – 6 ft Length, Taupe with Tan Tread","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Fibre-Dive diving board is used on compatible SR Smith pool diving stands. It provides a compact 6 ft diving surface suited for approved residential pool configurations. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Proper board length and surface condition are critical for safe use. Replacing a worn board restores traction and predictable flex characteristics. Installing the correct Fibre-Dive model ensures the board performs as intended with the existing stand. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 66-209-266S10T\u003c\/li\u003e \u003cli\u003eFibre-Dive diving board\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eTaupe finish with tan tread\u003c\/li\u003e \u003cli\u003eCompatible with SR Smith diving systems\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Board length, finish, and model must match the existing stand and pool requirements. Installation is typically done during board replacement or surface wear service. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith supports a wide range of pool diving configurations with consistent, serviceable product lines. Their Fibre-Dive boards are designed to integrate cleanly into existing SR Smith systems. The brand emphasizes safety, compatibility, and long-term use. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is often replaced when tread wear or fading reduces grip. Service techs usually identify it by board length, color, and stamped part number. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014348271890,"sku":"66-209-266S10T","price":804.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR66209266S10T_0.jpg?v=1770697086"},{"product_id":"sr-smith-66-209-266s20-fibre-dive-diving-board-6-ft-length-gray-finish","title":"SR Smith 66-209-266S20 Fibre-Dive Diving Board – 6 ft Length, Gray Finish","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Fibre-Dive diving board mounts to compatible SR Smith diving stands in residential pool applications. It provides a 6 ft diving surface designed for approved pool layouts. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Over time, diving boards can lose surface grip or structural response. Replacing the board restores safe use and predictable performance. Using the correct SR Smith model ensures proper fit and system balance. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 66-209-266S20\u003c\/li\u003e \u003cli\u003eFibre-Dive diving board\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eGray finish\u003c\/li\u003e \u003cli\u003eDesigned for SR Smith diving systems\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Board selection must match the existing stand and pool configuration. Installation is straightforward when replacing an existing SR Smith board. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith manufactures diving equipment used across residential and commercial aquatic environments. Their product ecosystem allows straightforward replacement without redesigning the system. Parts are built for consistency and long-term support. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is typically replaced due to surface wear or cosmetic aging. Technicians identify it by length, finish, and compatibility with existing SR Smith stands. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014348304658,"sku":"66-209-266S20","price":736.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR66209266S20_0.jpg?v=1770697087"},{"product_id":"sr-smith-66-209-266s20t-fibre-dive-diving-board-6-ft-length-pewter-gray-with-gray-tread","title":"SR Smith 66-209-266S20T Fibre-Dive Diving Board – 6 ft Length, Pewter Gray with Gray Tread","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Fibre-Dive diving board is used on compatible SR Smith diving board stands. It provides a 6 ft diving surface with integrated tread for residential pool use. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Proper tread condition is critical for safe footing. A worn or mismatched board can reduce traction and affect board response. Replacing the board maintains safety and restores original system performance. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 66-209-266S20T\u003c\/li\u003e \u003cli\u003eFibre-Dive diving board\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003ePewter Gray finish with gray tread\u003c\/li\u003e \u003cli\u003eCompatible with SR Smith diving systems\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Board model and length must align with the existing stand and pool configuration. Installation is typically part of routine board replacement. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith offers a complete ecosystem of pool diving and access equipment. Their boards are engineered for consistency across installations. This allows service technicians to replace components without altering the system layout. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is commonly serviced when tread wear becomes noticeable or grip is reduced. Techs usually identify it by color, tread pattern, and stamped part number. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014348468498,"sku":"66-209-266S20T","price":804.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR66209266S20T_0.jpg?v=1770697090"},{"product_id":"sr-smith-66-209-266s2-1-fibre-dive-diving-board-6-ft-length-radiant-white","title":"SR Smith 66-209-266S2-1 Fibre-Dive Diving Board – 6 ft Length, Radiant White","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Fibre-Dive diving board mounts to compatible SR Smith diving stands in residential pool settings. It provides a 6 ft diving surface designed for approved pool installations. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Surface condition and board compatibility directly impact safety. Replacing an aging board restores traction and proper board response. Using the correct SR Smith model avoids fitment and performance issues. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 66-209-266S2-1\u003c\/li\u003e \u003cli\u003eFibre-Dive diving board\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eRadiant White finish\u003c\/li\u003e \u003cli\u003eDesigned for SR Smith diving systems\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Board length and model must match the existing stand and pool configuration. Installation is typically performed during routine board replacement. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith products are trusted across residential and commercial aquatic environments. Their diving boards are built to integrate seamlessly with standardized stand systems. The brand focuses on safety, serviceability, and long-term product support. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is often replaced due to surface wear or cosmetic aging. Technicians usually identify it by board length and finish during inspection. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014351515922,"sku":"66-209-266S2-1","price":642.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR66209266S21_0.jpg?v=1770697093"},{"product_id":"sr-smith-66-209-266s24-fibre-dive-diving-board-6-ft-length-gray-graphite-with-clear-tread","title":"SR Smith 66-209-266S24 Fibre-Dive Diving Board – 6 ft Length, Gray Graphite with Clear Tread","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Fibre-Dive diving board is installed on compatible SR Smith diving stands. It provides a 6 ft diving surface with clear tread for residential pool applications. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Worn boards can lose traction and affect diving performance. Replacing the board restores safe footing and predictable flex. Correct model selection ensures proper compatibility with the existing stand. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 66-209-266S24\u003c\/li\u003e \u003cli\u003eFibre-Dive diving board\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eGray Graphite finish with clear tread\u003c\/li\u003e \u003cli\u003eCompatible with SR Smith diving systems\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Board model, finish, and length must match the existing SR Smith stand. Installation is typically part of routine board replacement service. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith supports pool professionals with standardized, serviceable equipment systems. Their diving boards are engineered for consistency across installations. This allows safe replacement without altering the original design. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is commonly replaced when tread wear or surface aging is observed. Techs identify it by color, tread style, and part number during inspection. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014351548690,"sku":"66-209-266S24","price":792.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR66209266S24_0.jpg?v=1770697096"},{"product_id":"sr-smith-66-209-266s3-1-fibre-dive-diving-board-6-ft-length-marine-blue","title":"SR Smith 66-209-266S3-1 Fibre-Dive Diving Board – 6 ft Length, Marine Blue","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Fibre-Dive diving board mounts to compatible SR Smith diving board stands on residential pools. It provides a 6 ft diving surface intended for approved pool configurations and proper stand height. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e A diving board with worn surfaces or incorrect sizing can compromise footing and board response. Replacing the board restores safe use and predictable performance. Matching the correct board model ensures it works properly with the existing stand. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 66-209-266S3-1\u003c\/li\u003e \u003cli\u003eFibre-Dive diving board\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eMarine Blue finish\u003c\/li\u003e \u003cli\u003eFor use with SR Smith diving board systems\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Board length and model must match the existing stand and pool configuration. Installation is typically performed during board replacement or surface wear service. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith supplies diving and access equipment used across residential and commercial pools. Their systems are built around standardized components that simplify service and replacement. Products are designed to integrate cleanly into existing pool installations. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is commonly replaced due to surface wear, fading, or loss of traction. Technicians usually identify it by board length, color, and stamped part number. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014351679762,"sku":"66-209-266S3-1","price":642.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR66209266S31_0.jpg?v=1770697101"},{"product_id":"sr-smith-66-209-576s2b-truetread-diving-board-6-ft-length-radiant-white-with-blue-tread","title":"SR Smith 66-209-576S2B TrueTread Diving Board – 6 ft Length, Radiant White with Blue Tread","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This TrueTread diving board installs on compatible SR Smith diving board stands. It provides a 6 ft diving surface with integrated tread for residential pool use. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Proper tread condition is critical for safe footing on a diving board. Worn or incorrect boards can reduce grip and affect user confidence. Replacing the board restores traction and proper board behavior. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 66-209-576S2B\u003c\/li\u003e \u003cli\u003eTrueTread diving board\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eRadiant White finish with blue tread\u003c\/li\u003e \u003cli\u003eCompatible with SR Smith diving systems\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Board model and length must align with the existing SR Smith stand. Installation is typically done during routine board replacement. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith supports pool professionals with consistent, service-friendly diving systems. Their boards and stands are engineered to work together without modification. This approach simplifies maintenance and long-term support. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is often replaced when tread wear becomes visible or slip resistance is reduced. Technicians identify it by tread color, board length, and part number. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014351712530,"sku":"66-209-576S2B","price":934.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR66209576S2B_0.jpg?v=1770697103"},{"product_id":"sr-smith-66-209-586s10-frontier-ii-diving-board-6-ft-length-taupe","title":"SR Smith 66-209-586S10 Frontier II Diving Board – 6 ft Length, Taupe","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Frontier II diving board mounts to compatible SR Smith diving board stands. It provides a 6 ft diving surface suitable for approved residential pool installations. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e An aging or mismatched diving board can affect balance and surface grip. Replacing the board restores safe use and proper board response. Using the correct Frontier II model ensures compatibility with the existing stand. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 66-209-586S10\u003c\/li\u003e \u003cli\u003eFrontier II diving board\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eTaupe finish\u003c\/li\u003e \u003cli\u003eFor use with SR Smith diving systems\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Board length and model must match the installed stand and pool configuration. Installation is typically part of routine board replacement service. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith manufactures diving equipment used in residential and commercial aquatic environments. Their product lines are built around compatibility and serviceability. Replacement boards are engineered to integrate without altering the system. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is commonly replaced due to surface wear or cosmetic fading. Technicians usually recognize it by board length, finish, and Frontier II labeling. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014351745298,"sku":"66-209-586S10","price":781.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR66209586S10_0.jpg?v=1770697105"},{"product_id":"sr-smith-66-209-586s2-frontier-ii-diving-board-6-ft-length-radiant-white","title":"SR Smith 66-209-586S2 Frontier II Diving Board – 6 ft Length, Radiant White","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Frontier II diving board is installed on compatible SR Smith diving board stands. It provides a 6 ft diving surface for residential pool applications. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Diving boards experience surface wear and flex fatigue over time. Replacing the board restores safe footing and predictable performance. Selecting the correct model prevents fitment and balance issues. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 66-209-586S2\u003c\/li\u003e \u003cli\u003eFrontier II diving board\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eRadiant White finish\u003c\/li\u003e \u003cli\u003eCompatible with SR Smith diving systems\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Board length and model must match the existing SR Smith stand. Installation is typically completed during board replacement. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith products are widely used across residential pools and aquatic facilities. Their diving systems are built to support straightforward service and replacement. Consistent part numbering simplifies long-term maintenance. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is often replaced when surface wear or discoloration is noted. Technicians identify it by length, finish, and part number. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014351778066,"sku":"66-209-586S2","price":726.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR66209586S2_0.jpg?v=1770697107"},{"product_id":"sr-smith-66-209-586s3-frontier-ii-diving-board-6-ft-length-marine-blue","title":"SR Smith 66-209-586S3 Frontier II Diving Board – 6 ft Length, Marine Blue","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Frontier II diving board mounts to compatible SR Smith diving board stands on residential pools. It provides a 6 ft diving surface intended for approved installations. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e A worn or incorrect diving board can reduce traction and affect board response. Replacing the board restores safe operation and consistent performance. Matching the correct Frontier II model ensures proper integration with the stand. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 66-209-586S3\u003c\/li\u003e \u003cli\u003eFrontier II diving board\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eMarine Blue finish\u003c\/li\u003e \u003cli\u003eFor use with SR Smith diving systems\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Board model and length must align with the existing SR Smith stand. Installation is typically part of routine board replacement. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith supports pool professionals with standardized diving equipment systems. Their products are engineered for consistency across installations. This makes replacement straightforward without redesigning the setup. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is commonly serviced when surface wear or fading becomes noticeable. Technicians usually identify it by board color, length, and labeling. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014351810834,"sku":"66-209-586S3","price":726.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR66209586S3_0.jpg?v=1770697110"},{"product_id":"sr-smith-66-209-596s10-frontier-iii-diving-board-6-ft-length-taupe","title":"SR Smith 66-209-596S10 Frontier III Diving Board – 6 ft Length, Taupe","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Frontier III diving board installs on compatible SR Smith diving board stands. It provides a 6 ft diving surface for approved residential pool configurations. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Diving boards wear over time due to exposure and repeated use. Replacing the board restores safe footing and predictable flex. Using the correct Frontier III model avoids compatibility issues with the stand. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 66-209-596S10\u003c\/li\u003e \u003cli\u003eFrontier III diving board\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eTaupe finish\u003c\/li\u003e \u003cli\u003eCompatible with SR Smith diving systems\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Board length and model must match the installed stand and pool configuration. Installation is typically completed during board replacement service. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith manufactures diving equipment used across residential and commercial aquatic facilities. Their systems emphasize consistency and long-term serviceability. Replacement components are engineered to fit without modification. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is often replaced when surface wear or fading is observed. Technicians identify it by Frontier III labeling, color, and board length. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014351843602,"sku":"66-209-596S10","price":778.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR66209596S10_0.jpg?v=1770697111"},{"product_id":"sr-smith-66-209-596s10t-frontier-iii-diving-board-6-ft-length-taupe-with-tan-tread","title":"SR Smith 66-209-596S10T Frontier III Diving Board – 6 ft Length, Taupe with Tan Tread","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Frontier III diving board mounts to compatible SR Smith diving board stands. It provides a 6 ft diving surface with integrated tread for residential pool use. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Tread condition directly affects footing and user safety. A worn board can reduce grip and confidence during use. Replacing the board restores traction and proper board response. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 66-209-596S10T\u003c\/li\u003e \u003cli\u003eFrontier III diving board\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eTaupe finish with tan tread\u003c\/li\u003e \u003cli\u003eFor use with SR Smith diving systems\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Board model and length must align with the existing SR Smith stand. Installation is typically part of routine board replacement. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith supports pool professionals with standardized diving and access equipment. Their Frontier series boards integrate cleanly into existing systems. This simplifies service and replacement across product generations. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is commonly replaced when tread wear becomes noticeable. Technicians identify it by tread color, finish, and Frontier III designation. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014351876370,"sku":"66-209-596S10T","price":849.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR66209596S10T_0.jpg?v=1770697113"},{"product_id":"sr-smith-66-209-596s2-frontier-iii-diving-board-6-ft-length-radiant-white","title":"SR Smith 66-209-596S2 Frontier III Diving Board – 6 ft Length, Radiant White","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Frontier III diving board installs on compatible SR Smith diving board stands. It provides a 6 ft diving surface for residential pool installations. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Surface wear or aging can reduce board grip and performance. Replacing the board restores safe use and consistent response. Correct model selection prevents fitment and balance issues. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 66-209-596S2\u003c\/li\u003e \u003cli\u003eFrontier III diving board\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eRadiant White finish\u003c\/li\u003e \u003cli\u003eCompatible with SR Smith diving systems\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Board length and model must match the existing SR Smith stand and pool setup. Installation is typically performed during board replacement. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith products are widely used in residential and commercial pool environments. Their diving systems are built to support consistent replacement and service. Standardized designs reduce downtime during maintenance. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is often replaced due to surface wear or cosmetic aging. Technicians identify it by length, finish, and Frontier III labeling. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014351909138,"sku":"66-209-596S2","price":679.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR66209596S2_0.jpg?v=1770697115"},{"product_id":"sr-smith-66-209-596s24-frontier-iii-diving-board-6-ft-length-gray-granite-with-clear-tread","title":"SR Smith 66-209-596S24 Frontier III Diving Board – 6 ft Length, Gray Granite with Clear Tread","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Frontier III diving board mounts to compatible SR Smith diving board stands. It provides a 6 ft diving surface with clear tread for residential pool use. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Tread wear and surface aging can reduce safe footing. Replacing the board restores grip and predictable performance. Using the correct model ensures compatibility with the existing stand. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 66-209-596S24\u003c\/li\u003e \u003cli\u003eFrontier III diving board\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eGray Granite finish with clear tread\u003c\/li\u003e \u003cli\u003eFor use with SR Smith diving systems\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Board model and length must align with the installed SR Smith stand. Installation is typically part of routine board replacement service. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith supplies diving equipment used across residential pools and aquatic facilities. Their Frontier series is built for consistent integration and serviceability. Replacement parts are engineered to fit existing systems without modification. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is commonly replaced when tread wear or surface aging is observed. Technicians identify it by tread style, finish, and part number. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014351941906,"sku":"66-209-596S24","price":832.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR66209596S24_0.jpg?v=1770697118"},{"product_id":"sr-smith-66-209-596s2nh-frontier-iii-diving-board-6-ft-length-radiant-white-no-mounting-holes","title":"SR Smith 66-209-596S2NH Frontier III Diving Board – 6 ft Length, Radiant White, No Mounting Holes","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Frontier III diving board is used on compatible SR Smith diving systems where the board is mounted using a separate attachment method. It provides a 6 ft diving surface without pre-drilled mounting holes. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Boards without mounting holes are required for specific stand or jig-based installations. Using a drilled board in these systems can prevent proper mounting or compromise safety. Replacing the board with the correct no-hole version maintains proper fit and function. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 66-209-596S2NH\u003c\/li\u003e \u003cli\u003eFrontier III diving board\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eRadiant White finish\u003c\/li\u003e \u003cli\u003eNo factory mounting holes\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e This board is intended for systems that do not require pre-drilled mounting holes. Verify the stand or jig configuration before replacement. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith builds pool diving equipment used across residential and commercial facilities. Their systems are designed around standardized components that support long-term serviceability. Replacement parts are engineered to integrate cleanly into existing installations. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is typically encountered during replacements on cantilever or jig-mounted diving systems. Technicians recognize it by the absence of mounting holes and the Frontier III profile. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014351974674,"sku":"66-209-596S2NH","price":697.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR66209596S2NH_0.jpg?v=1770697119"},{"product_id":"sr-smith-66-209-596s3-frontier-iii-diving-board-6-ft-length-marine-blue","title":"SR Smith 66-209-596S3 Frontier III Diving Board – 6 ft Length, Marine Blue","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Frontier III diving board mounts to compatible SR Smith diving board stands. It provides a 6 ft diving surface for approved residential pool installations. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Over time, diving boards lose traction and structural response due to exposure and use. Replacing the board restores safe footing and predictable performance. Selecting the correct Frontier III model ensures proper fit with the existing stand. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 66-209-596S3\u003c\/li\u003e \u003cli\u003eFrontier III diving board\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eMarine Blue finish\u003c\/li\u003e \u003cli\u003eCompatible with SR Smith diving systems\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Board length and model must match the installed SR Smith stand. Installation is typically performed during routine board replacement. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith products are widely used in residential pools and aquatic facilities. Their diving systems emphasize consistency and service-friendly replacement. Standardized designs reduce downtime during maintenance. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is often replaced due to surface wear or fading. Technicians identify it by board length, color, and Frontier III designation. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014352007442,"sku":"66-209-596S3","price":679.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR66209596S3_0.jpg?v=1770697121"},{"product_id":"sr-smith-68-209-58662-frontier-ii-diving-assembly-6-ft-board-radiant-white","title":"SR Smith 68-209-58662 Frontier II Diving Assembly – 6 ft Board, Radiant White","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Frontier II diving assembly is a complete SR Smith diving setup built around a 6 ft diving board. It is used as a matched system for residential pool diving installations. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Using a matched diving assembly ensures proper board height, balance, and performance. Mixing incompatible components can affect safety and inspection compliance. Replacing the full assembly restores correct system geometry. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 68-209-58662\u003c\/li\u003e \u003cli\u003eFrontier II diving assembly\u003c\/li\u003e \u003cli\u003eIncludes a 6 ft diving board\u003c\/li\u003e \u003cli\u003eRadiant White board finish\u003c\/li\u003e \u003cli\u003eSR Smith matched system configuration\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e This assembly should replace an existing Frontier II system of the same configuration. Installation should follow original mounting and anchoring locations. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith manufactures complete diving systems used across residential and commercial pools. Their assemblies are engineered as integrated units for consistent performance. This approach simplifies installation and long-term service. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e Technicians encounter this assembly during full diving system replacements or pool upgrades. It is often identified when both the board and stand show age or corrosion. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014352040210,"sku":"68-209-58662","price":2422.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR6820958662_0.jpg?v=1770697123"},{"product_id":"sr-smith-68-209-7362-flyte-deck-diving-board-with-stand-6-ft-length-radiant-white","title":"SR Smith 68-209-7362 Flyte-Deck Diving Board with Stand – 6 ft Length, Radiant White","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Flyte-Deck system combines a diving board and stand into a single SR Smith assembly. It provides a 6 ft diving surface with an integrated support structure. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Integrated systems simplify installation and reduce compatibility issues. Replacing the full Flyte-Deck assembly restores proper board height and stability. Using the correct system avoids unsafe mismatches between board and stand. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 68-209-7362\u003c\/li\u003e \u003cli\u003eFlyte-Deck diving board with stand\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eRadiant White finish\u003c\/li\u003e \u003cli\u003eSR Smith integrated diving system\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e This system should replace an existing Flyte-Deck configuration of the same size. Installation should follow original anchoring locations and pool clearances. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith builds integrated pool access and diving systems for residential and aquatic facility use. Their Flyte-Deck systems focus on consistency and serviceability. Components are engineered to work together without modification. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This system is typically replaced during pool renovations or when the original stand shows corrosion. Technicians recognize it by the integrated stand and board profile. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014352072978,"sku":"SSR682097362","price":1179.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR682097362_0.jpg?v=1770697125"},{"product_id":"sr-smith-68-210-59610-cantilever-606-jump-stand-with-frontier-iii-diving-board-taupe","title":"SR Smith 68-210-59610 Cantilever 606 Jump Stand with Frontier III Diving Board – Taupe","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Cantilever 606 jump system pairs a stand with a Frontier III diving board. It provides a complete SR Smith diving setup for residential pool installations. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Cantilever systems rely on precise geometry for safe board response. Replacing the full jump system restores proper flex and balance. Using a matched stand and board prevents performance and safety issues. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 68-210-59610\u003c\/li\u003e \u003cli\u003eCantilever 606 jump stand with board\u003c\/li\u003e \u003cli\u003eFrontier III diving board included\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eTaupe finish\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e This system should replace an existing Cantilever 606 setup with the same configuration. Installation should follow original mounting and clearance requirements. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith supports pool professionals with complete diving systems built for long-term use. Their cantilever designs emphasize predictable performance and service access. Replacement systems are engineered for straightforward integration. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This system is commonly replaced during major pool upgrades or failed inspections. Technicians identify it by the cantilever stand design and Frontier III board. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014352105746,"sku":"68-210-59610","price":1978.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR6821059610_0.jpg?v=1770697127"},{"product_id":"sr-smith-68-210-73620-flyte-deck-ii-stand-with-fibre-dive-board-6-ft-length-gray-finish","title":"SR Smith 68-210-73620 Flyte-Deck II Stand with Fibre-Dive Board – 6 ft Length, Gray Finish","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Flyte-Deck II system combines a stand with a Fibre-Dive diving board. It provides a 6 ft diving surface as a matched SR Smith diving assembly. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Matched systems ensure proper board height and load support. Replacing the full Flyte-Deck II assembly restores safe operation and alignment. Mixing components from different systems can cause fitment problems. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 68-210-73620\u003c\/li\u003e \u003cli\u003eFlyte-Deck II stand with diving board\u003c\/li\u003e \u003cli\u003eFibre-Dive board included\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eGray finish\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e This system should be installed as a replacement for the same Flyte-Deck II configuration. Verify pool clearances and anchoring locations before installation. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith manufactures integrated diving systems for residential and commercial pools. Their Flyte-Deck II designs prioritize consistency and serviceability. Systems are engineered to replace like-for-like without modification. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This system is often replaced during renovations or when the original stand corrodes. Technicians identify it by the Flyte-Deck II stand profile and Fibre-Dive board. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014352138514,"sku":"SSR6821073620","price":1441.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR6821073620_0.jpg?v=1770697129"},{"product_id":"sr-smith-68-211-59610-salt-pool-jump-system-with-frontier-iii-diving-board-6-ft-length-taupe","title":"SR Smith 68-211-59610 Salt Pool Jump System with Frontier III Diving Board – 6 ft Length, Taupe","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This salt pool jump system pairs a Frontier III diving board with a compatible SR Smith stand. It is intended for pools using saltwater sanitation systems. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Saltwater environments accelerate wear on diving equipment. Using a system intended for salt pools helps maintain service life and safety. Replacing the full system ensures consistent performance. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 68-211-59610\u003c\/li\u003e \u003cli\u003eSalt pool jump system\u003c\/li\u003e \u003cli\u003eFrontier III diving board included\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eTaupe finish\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e This system should replace an existing salt pool jump system of the same configuration. Installation should follow original anchoring and clearance guidelines. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith offers diving systems tailored for different pool environments. Their salt pool systems are built within a broader professional equipment ecosystem. Replacement assemblies are engineered for consistent integration. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This system is commonly replaced when salt exposure accelerates corrosion. Technicians identify it by the salt pool designation and Frontier III board. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014352171282,"sku":"SSR6821159610","price":2156.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR6821159610_0.jpg?v=1770697131"},{"product_id":"sr-smith-68-211-5962-salt-pool-jump-system-with-frontier-iii-diving-board-6-ft-length-radiant-white","title":"SR Smith 68-211-5962 Salt Pool Jump System with Frontier III Diving Board – 6 ft Length, Radiant White","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This salt pool jump system combines a Frontier III diving board with a matched SR Smith stand. It is used on residential pools equipped with saltwater systems. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Saltwater conditions can shorten the lifespan of standard diving equipment. Replacing the system with a salt pool-rated configuration restores safety and stability. Using the correct system prevents premature wear. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 68-211-5962\u003c\/li\u003e \u003cli\u003eSalt pool jump system\u003c\/li\u003e \u003cli\u003eFrontier III diving board included\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eRadiant White finish\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e This system should replace an existing salt pool jump system with the same layout. Verify anchoring and pool clearances before installation. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith supports pool professionals with systems built for specific pool environments. Their salt pool equipment integrates with their broader diving system lineup. Replacement systems are engineered for consistency and serviceability. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This system is often replaced after corrosion is noted around the stand or mounting points. Technicians recognize it by the salt pool configuration and Frontier III board. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014352204050,"sku":"SSR682115962","price":1837.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR682115962_0.jpg?v=1770697134"},{"product_id":"sr-smith-70-209-7362-flyte-deck-ii-diving-board-with-jig-6-ft-length-radiant-white","title":"SR Smith 70-209-7362 Flyte-Deck II Diving Board with Jig – 6 ft Length, Radiant White","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Flyte-Deck II diving board is supplied with a jig for proper installation. It provides a 6 ft diving surface used in Flyte-Deck II systems. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Proper mounting is critical for board safety and performance. Using the correct board and jig ensures accurate hole placement and alignment. Replacing the board with the correct version prevents installation issues. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 70-209-7362\u003c\/li\u003e \u003cli\u003eFlyte-Deck II diving board\u003c\/li\u003e \u003cli\u003eIncludes installation jig\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003eRadiant White finish\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e This board is intended for Flyte-Deck II systems that require jig-based installation. Follow original installation procedures for alignment. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith designs diving systems with consistent installation methods and service access. Their Flyte-Deck II components are engineered to work together precisely. This approach simplifies replacement and reduces errors. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is typically encountered during Flyte-Deck II replacements or upgrades. Technicians identify it by the included jig and Flyte-Deck II designation. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014352236818,"sku":"70-209-7362","price":1649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR702097362_0.jpg?v=1770697135"},{"product_id":"sr-smith-70-209-73620-flyte-deck-ii-diving-board-with-jig-6-ft-length-pewter-gray","title":"SR Smith 70-209-73620 Flyte-Deck II Diving Board with Jig – 6 ft Length, Pewter Gray","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Flyte-Deck II diving board is supplied with a jig to support accurate installation on compatible SR Smith Flyte-Deck II stands. It provides a 6 ft diving surface for approved pool configurations. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Correct mounting and alignment are critical for safe board performance. Using the proper board and jig helps avoid mis-drilled holes and mounting stress that can shorten service life. Replacing the board with the correct model keeps the system working as intended. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 70-209-73620\u003c\/li\u003e \u003cli\u003eFlyte-Deck II diving board\u003c\/li\u003e \u003cli\u003eIncludes installation jig\u003c\/li\u003e \u003cli\u003e6 ft board length\u003c\/li\u003e \u003cli\u003ePewter Gray finish\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e This board is intended for Flyte-Deck II installations that use a jig for positioning and hole layout. Match the board length and model to the existing stand and pool setup. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith builds diving and access equipment used across residential pools and aquatic facilities. Their systems follow consistent installation methods to support service work and long-term replacement. Components are engineered to integrate cleanly within SR Smith product families. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e Technicians typically replace this board when the surface is worn, the color is heavily faded, or the mounting points no longer feel solid. It is usually identified by the Flyte-Deck II label, board length, and included jig. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014352269586,"sku":"70-209-73620","price":1689.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR7020973620_0.jpg?v=1770697137"},{"product_id":"sr-smith-70-209-7402-flyte-deck-ii-diving-board-with-jig-10-ft-length-radiant-white","title":"SR Smith 70-209-7402 Flyte-Deck II Diving Board with Jig – 10 ft Length, Radiant White","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This Flyte-Deck II diving board is supplied with a jig for accurate installation on compatible SR Smith Flyte-Deck II systems. It provides a 10 ft diving surface for approved pool configurations and proper stand height. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Longer boards depend on correct mounting geometry to avoid bounce issues and uneven flex. Using the included jig helps keep alignment consistent and reduces installation errors. Replacing a worn board restores traction and predictable performance. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number 70-209-7402\u003c\/li\u003e \u003cli\u003eFlyte-Deck II diving board\u003c\/li\u003e \u003cli\u003eIncludes installation jig\u003c\/li\u003e \u003cli\u003e10 ft board length\u003c\/li\u003e \u003cli\u003eRadiant White finish\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e Verify the existing system is Flyte-Deck II and that the stand and pool clearance are correct for a 10 ft board. Use the jig as intended to maintain proper hole placement and alignment. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith is a major name in pool diving and access equipment used by service pros and facilities. Their systems are built around consistent, replaceable components that simplify maintenance. This helps keep installations serviceable over the long term. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This board is usually replaced when the surface is slick, cracked, or heavily weathered. Techs identify it by the 10 ft length requirement, Flyte-Deck II labeling, and the included jig. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014352302354,"sku":"70-209-7402","price":2047.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSR702097402_0.jpg?v=1770697139"},{"product_id":"sr-smith-t7-n55-c-t7-complete-diving-system-board-spring-base-jig-stainless-hardware-pebble-finish","title":"SR Smith T7-N55-C T7 Complete Diving System – Board, Spring, Base, Jig, Stainless Hardware, Pebble Finish","description":"\u003cp\u003e\u003cstrong\u003eWhat This Part Is Used For\u003c\/strong\u003e\u003cbr\u003e This T7 complete diving system is a full SR Smith diving setup that includes the primary components needed for a T7 installation. It is used when installing a new diving system or replacing an existing T7 system as a matched assembly. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWhy This Part Matters\u003c\/strong\u003e\u003cbr\u003e Diving systems work best when the board, spring, and base are matched for the correct geometry and load response. Replacing the full system helps avoid compatibility issues that can show up as instability, noise, or uneven flex. A complete replacement is also common during renovations where old hardware has corrosion or fatigue. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKey Features and Specifications\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eManufacturer part number T7-N55-C\u003c\/li\u003e \u003cli\u003eT7 complete diving system\u003c\/li\u003e \u003cli\u003eIncludes board, spring, base, and jig\u003c\/li\u003e \u003cli\u003eIncludes stainless hardware\u003c\/li\u003e \u003cli\u003ePebble finish\u003c\/li\u003e \u003cli\u003eSystem configuration details should be confirmed by part number\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eInstallation and Fitment Guidance\u003c\/strong\u003e\u003cbr\u003e This is a system-level replacement and should be matched to the existing site requirements and pool clearances. Verify the current setup and local code requirements before ordering. Confirm by manufacturer part number before ordering. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eAbout the SR Smith Brand\u003c\/strong\u003e\u003cbr\u003e SR Smith supports professional pool installations with complete diving and access systems. Their ecosystem is built around standardized parts that are serviceable and replaceable over time. Many facilities and builders rely on SR Smith for consistent integration across new installs and upgrades. \u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCommon Service Context\u003c\/strong\u003e\u003cbr\u003e This complete system is typically ordered during a major pool renovation or when a stand and spring show advanced corrosion. Techs usually identify the correct replacement by the existing model designation and the need to replace multiple components at once. \u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52014352335122,"sku":"SSRT7N55C","price":2601.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/SSRT7N55C_0.jpg?v=1770697142"},{"product_id":"s-r-smith-70-209-73623-flyte-deck-ii-base-with-66-209-596s23-frontier-iii-6-ft-board-in-pebble-residential-diving-board-bundle-ships-from-s-r-smith","title":"S.R.Smith Frontier III 6 ft Diving Board Complete Set - 66-209-596S23 Pebble Board with 70-209-73623 Flyte-Deck II Base","description":"\u003ch2\u003e\u003cstrong\u003eS.R.Smith 6 ft Flyte-Deck II Diving Board Bundle in Pebble\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cp\u003eThe S.R.Smith 70-209-73623 and 66-209-596S23 bundle pairs a 6 ft Flyte-Deck II diving board base with a matching 6 ft Frontier III residential diving board in Pebble with clear tread. This complete board and base combination is built for residential in-ground pools that are properly designed and approved for diving board use.\u003c\/p\u003e\n\n\u003cp\u003eThe Flyte-Deck II is one of S.R.Smith’s most popular diving board stands, known for its clean profile, durable acrylic construction, fiberglass reinforcement, and stainless steel hardware. The included Frontier III board is designed for moderate to heavy duty residential use and features a fiberglass reinforced core, acrylic shell, flexible outer edge, and slip-resistant sanded tread for secure footing.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eIncluded in This Bundle\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eS.R.Smith 70-209-73623 Flyte-Deck II 6 ft diving board base, Pebble\u003c\/li\u003e\n  \u003cli\u003eS.R.Smith 66-209-596S23 Frontier III 6 ft residential diving board, Pebble with clear tread\u003c\/li\u003e\n  \u003cli\u003eMatching board and stand combination shipped together as a manufacturer bundle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eDesigned for residential in-ground pools approved for diving board installation\u003c\/li\u003e\n  \u003cli\u003e6 ft Flyte-Deck II stand with durable, scratch-resistant acrylic construction\u003c\/li\u003e\n  \u003cli\u003eFrontier III board designed for moderate to heavy duty residential use\u003c\/li\u003e\n  \u003cli\u003eFiberglass reinforced board core with acrylic outer shell\u003c\/li\u003e\n  \u003cli\u003eClear non-slip sanded tread for improved footing\u003c\/li\u003e\n  \u003cli\u003ePebble finish for a clean, natural look around the pool deck\u003c\/li\u003e\n  \u003cli\u003e250 lb listed weight capacity\u003c\/li\u003e\n  \u003cli\u003eShips direct from S.R.Smith as a bundled order\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: S.R.Smith\u003c\/li\u003e\n  \u003cli\u003eBase Part Number: 70-209-73623\u003c\/li\u003e\n  \u003cli\u003eBoard Part Number: 66-209-596S23\u003c\/li\u003e\n  \u003cli\u003eSeries: Flyte-Deck II Stand with Frontier III Board\u003c\/li\u003e\n  \u003cli\u003eBoard Length: 6 ft\u003c\/li\u003e\n  \u003cli\u003eColor: Pebble\u003c\/li\u003e\n  \u003cli\u003eTread Color: Clear\u003c\/li\u003e\n  \u003cli\u003eUse: Residential in-ground pool diving board system\u003c\/li\u003e\n  \u003cli\u003eWeight Capacity: 250 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eImportant Compatibility Note\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cp\u003eThis diving board bundle should only be installed on a pool that meets the required diving envelope and installation standards for a 6 ft residential diving board. Before ordering, confirm that your pool, deck, anchors, and installation layout are compatible with the S.R.Smith Flyte-Deck II 6 ft system. If you are replacing an existing board or base, match the part numbers and verify all measurements before installation.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eShipping and Lead Time\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cp\u003eThis item ships direct from S.R.Smith as a bundled board and base order. Diving boards and stands may have a short manufacturer lead time before shipment. Transit timing can vary based on location, freight scheduling, and manufacturer availability.\u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52255269617938,"sku":null,"price":1899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/S.R.Smith_70-209-73623_Flyte-Deck_II_6_ft_Diving_Board_Bundle_with_66-209-596S23_Frontier_III_Board_Pebble.jpg?v=1778269472"},{"product_id":"s-r-smith-frontier-iii-8-ft-diving-board-complete-set-pebble-board-66-209-598s23-with-flyte-deck-ii-base-70-209-73823","title":"S.R.Smith Frontier III 8 ft Diving Board Complete Set - Pebble Board 66-209-598S23 with Flyte-Deck II Base 70-209-73823","description":"\u003ch2\u003e\u003cstrong\u003eS.R.Smith Frontier III 8 ft Diving Board Complete Set in Pebble\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cp\u003eThe S.R.Smith Frontier III 8 ft diving board complete set pairs the 66-209-598S23 Pebble Frontier III board with the 70-209-73823 Flyte-Deck II base. This board and base combination is designed for residential in-ground pools that are properly built and approved for an 8 ft diving board installation.\u003c\/p\u003e\n\n\u003cp\u003eThis complete set includes the matching Pebble board and Flyte-Deck II base, making it a strong option for replacing an older compatible diving board system or completing a new residential diving board installation. The Frontier III board is designed for moderate to heavy duty residential use, while the Flyte-Deck II base offers a clean, low-profile look with durable reinforced construction.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eIncluded in This Complete Set\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eS.R.Smith 66-209-598S23 Frontier III 8 ft diving board, Pebble with clear tread\u003c\/li\u003e\n  \u003cli\u003eS.R.Smith 70-209-73823 Flyte-Deck II 8 ft base, Pebble\u003c\/li\u003e\n  \u003cli\u003eMatching board and base combination shipped together as a manufacturer bundle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eComplete 8 ft residential diving board set\u003c\/li\u003e\n  \u003cli\u003eIncludes Frontier III board and Flyte-Deck II base\u003c\/li\u003e\n  \u003cli\u003ePebble finish for a clean, natural poolside appearance\u003c\/li\u003e\n  \u003cli\u003eClear non-slip sanded tread for secure footing\u003c\/li\u003e\n  \u003cli\u003eFlyte-Deck II base is made from durable, scratch-resistant acrylic reinforced with fiberglass\u003c\/li\u003e\n  \u003cli\u003eStainless steel hardware for added corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eDesigned for properly approved residential in-ground pool diving applications\u003c\/li\u003e\n  \u003cli\u003e250 lb listed weight capacity\u003c\/li\u003e\n  \u003cli\u003eShips direct from S.R.Smith as a bundled order\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eBrand: S.R.Smith\u003c\/li\u003e\n  \u003cli\u003eBoard Part Number: 66-209-598S23\u003c\/li\u003e\n  \u003cli\u003eBase Part Number: 70-209-73823\u003c\/li\u003e\n  \u003cli\u003eBoard Series: Frontier III\u003c\/li\u003e\n  \u003cli\u003eBase Series: Flyte-Deck II\u003c\/li\u003e\n  \u003cli\u003eBoard Length: 8 ft\u003c\/li\u003e\n  \u003cli\u003eColor: Pebble\u003c\/li\u003e\n  \u003cli\u003eTread Color: Clear\u003c\/li\u003e\n  \u003cli\u003eApplication: Residential in-ground pool diving board system\u003c\/li\u003e\n  \u003cli\u003eWeight Capacity: 250 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cstrong\u003eImportant Compatibility Note\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cp\u003eThis 8 ft diving board complete set should only be installed on a pool that meets the required diving envelope and installation standards for an 8 ft residential diving board. Before ordering, confirm that your pool, deck, anchors, and installation layout are compatible with the S.R.Smith Flyte-Deck II 8 ft system. If you are replacing an existing board or base, match the part numbers and verify all measurements before installation.\u003c\/p\u003e\n\n\u003ch2\u003e\u003cstrong\u003eShipping and Lead Time\u003c\/strong\u003e\u003c\/h2\u003e\n\n\u003cp\u003eThis item ships direct from S.R.Smith as a bundled board and base order. Diving boards and bases may have a short manufacturer lead time before shipment. Transit timing can vary based on location, freight scheduling, and manufacturer availability.\u003c\/p\u003e","brand":"SR Smith","offers":[{"title":"Default Title","offer_id":52255282364690,"sku":null,"price":2399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/files\/S.R.Smith_Frontier_III_8_ft_Diving_Board_Complete_Set_-_Pebble_Board_66-209-598S23_with_Flyte-Deck_II_Base_70-209-73823.png?v=1778269980"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0733\/2279\/1186\/collections\/Pool_diving_boards_and_diving_board_parts_including_complete_diving_system_replacement_board_jump_stand_U-frame_spring_base_jig_and_stainless_steel_hardware.png?v=1778159926","url":"https:\/\/www.aquaterrabackyard.com\/collections\/diving-boards.oembed?page=2","provider":"Aqua Terra Backyard","version":"1.0","type":"link"}